NJ Zoning Check

National Park zoning check

Enter your address to find your zone and see if your project fits. No account needed.

About these numbers

Enter a lot with a house in National Park's R1 zone and see, line by line, whether a house, addition, shed or detached garage meets the Borough's lot, yard, coverage and height limits.

Covers the Borough of National Park's single-family zone R1, Gloucester County. Checks a new house, an addition, an attached garage or a detached garage or shed.

Numbers last checked November 16, 2026 against the Borough's Zoning Ordinance (Ordinance 1-88), Article 8, Section 7.

Check a different address

We send the address to New Jersey's public parcel records and public zoning maps to find your lot. Privacy

Know your zone? Leave the address blank.Detailed check for architects and contractors

What you can build in National Park

National Park has one single-family zone covered here, R1. Each needs a lot of at least 6,000 sq ft. A house must sit 25 ft back from the street and 20 ft from the rear lot line. Houses can be up to 35 ft tall. Up to 30% of the lot may be covered.

New house or addition

Your address will show your exact numbers.

From the street
25 ft
From each side
10 ft
From the back
20 ft
Height
35 ft
See the limits for the R1 zone
ZoneFrontEach sideRearHeightEverything built on the lot
R1Lots of 6,000 sq ft25 ft10 ft20 ft35 ft30%
  • Coverage is a share of the lot.

Sheds and detached garages have their own rules. Enter your address above to see them.

Standard limits for single-family lots. Corner lots and special rules can change them. Last checked November 16, 2026. Confirm with the town before you design or buy.

National Park zoning questions

What are the setbacks in National Park, NJ?

For a single-family house. Corner lots can differ.

  • R1: 25 ft from the street, 10 ft on each side, 20 ft from the rear line.

What is the minimum lot size in National Park?

R1: 6,000 sq ft.

How tall can a house be in National Park?

R1: 35 ft.

How much of my lot can I cover in National Park?

R1: 30% lot coverage.

Can you recommend an architect in National Park?

Yes. Tell us about your project and we'll connect you with a vetted, licensed residential architect who works in National Park. It's free and there's no obligation.

We'll connect you with a vetted, licensed residential architect who works in National Park and can turn what your lot allows into drawings for your permit. Free, with no obligation.

Get a free architect referral

Zoning table for your drawings

ITEMREQUIREDEXISTINGPROPOSEDCOMPLIES

ENC = existing nonconforming condition, not increased. * = relief required.

Prepared with a calculation aid. Not a zoning determination. Confirm every requirement with the municipal zoning officer.

What this does not check

Where the numbers come from

Requirements were entered on November 16, 2026 from the Borough of National Park's Zoning Ordinance (Ordinance 1-88), Article 8, Section 7, as posted (scanned) on the Borough's website. Check every requirement against the current code before relying on it.

A calculation aid, not a zoning determination. Using this site means you agree to the terms of use; see also the privacy policy.

Pick a zone to startSee the table