NJ Zoning Check

Millville zoning check

Enter your address to find your zone and see if your project fits. No account needed.

About these numbers

Enter a single-family lot in Millville's LDR, MDR or HDR district and see, line by line, whether a house, addition, detached garage or shed meets the City's lot, yard, height and coverage limits.

Covers the City of Millville's single-family zones LDR, MDR and HDR, Cumberland County. Checks a new house, an addition or an attached garage.

Numbers last checked November 15, 2026 against the City's Schedule of District Regulations.

Check a different address

We send the address to New Jersey's public parcel records and public zoning maps to find your lot. Privacy

Know your zone? Leave the address blank.Detailed check for architects and contractors

What you can build in Millville

Millville has 3 single-family zones covered here: LDR, MDR and HDR. Minimum lot sizes run from 5,000 sq ft (HDR) to 2 acres (LDR). A house must sit 25 ft (MDR) to 75 ft (LDR) back from the street and 35 ft (MDR) to 75 ft (LDR) from the rear lot line. Houses can be up to 35 ft tall. Building coverage limits run from 25% (LDR) to 30% (MDR).

New house or addition

Depends on your zone. Your address will show your exact numbers.

From the street
25 to 75 ft
From each side
8 to 40 ft
From the back
35 to 75 ft
Height
35 ft
See the limits for every zone
ZoneFrontEach sideRearHeightEverything built on the lot
LDRLots of 2 acres75 ft40 ft75 ft35 ft25%
MDRLots of 10,000 sq ft25 ft10 ft35 ft35 ft30%
HDRLots of 5,000 sq ft25 ft8 ft35 ft35 ft30%
  • Coverage is a share of the lot.

Standard limits for single-family lots. Corner lots and special rules can change them. Last checked November 15, 2026. Confirm with the town before you design or buy.

Millville zoning questions

What are the setbacks in Millville, NJ?

For a single-family house. Corner lots can differ.

  • LDR: 75 ft from the street, 40 ft on each side, 75 ft from the rear line.
  • MDR: 25 ft from the street, 10 ft on each side, 35 ft from the rear line.
  • HDR: 25 ft from the street, 8 ft on each side, 35 ft from the rear line.

What is the minimum lot size in Millville?

LDR: 2 acres; MDR: 10,000 sq ft; HDR: 5,000 sq ft.

How tall can a house be in Millville?

LDR: 35 ft; MDR: 35 ft; HDR: 35 ft.

How much of my lot can I cover in Millville?

LDR: 25% building coverage; MDR: 30% building coverage; HDR: 30% building coverage.

Can you recommend an architect in Millville?

Yes. Tell us about your project and we'll connect you with a vetted, licensed residential architect who works in Millville. It's free and there's no obligation.

We'll connect you with a vetted, licensed residential architect who works in Millville and can turn what your lot allows into drawings for your permit. Free, with no obligation.

Get a free architect referral

Zoning table for your drawings

ITEMREQUIREDEXISTINGPROPOSEDCOMPLIES

ENC = existing nonconforming condition, not increased. * = relief required.

Prepared with a calculation aid. Not a zoning determination. Confirm every requirement with the municipal zoning officer.

What this does not check

Where the numbers come from

Requirements were entered on November 15, 2026 from a published copy of the City's Chapter 30, Attachment 1, Schedule of District Regulations (Supp 63, June 2026), adopted by Section 30-106. Check every requirement against the current code before relying on it.

A calculation aid, not a zoning determination. Using this site means you agree to the terms of use; see also the privacy policy.

Pick a zone to startSee the table