NJ Zoning Check

Fairfield (Cumberland) zoning check

Enter your address to find your zone and see if your project fits. No account needed.

About these numbers

Enter a lot with a house in Fairfield Township and see, line by line, whether a house, addition, shed or detached garage meets the Township's lot, yard, coverage and height limits.

Covers the Township of Fairfield's single-family zones R-2, R-1, R-3, A and A-N, Cumberland County. Checks a new house, an addition, an attached garage or a detached garage or shed.

Numbers last checked November 16, 2026 against the Township's Chapter 450 Schedule of District Regulations.

Check a different address

We send the address to New Jersey's public parcel records and public zoning maps to find your lot. Privacy

Know your zone? Leave the address blank.Detailed check for architects and contractors

What you can build in Fairfield (Cumberland)

Fairfield (Cumberland) has 5 single-family zones covered here: R-2, R-1, R-3, A and A-N. Minimum lot sizes run from 35,022 sq ft (R-3) to 6 acres (A-N). A house must sit 40 ft (R-2) to 50 ft (R-1) back from the street and 20 ft (R-2) to 30 ft (A-N) from the rear lot line. Height limits run from 30 ft (A-N) to 35 ft (R-2). Building coverage limits run from 5% (A-N) to 40% (R-3).

New house or addition

Depends on your zone. Your address will show your exact numbers.

From the street
40 to 50 ft
From each side
20 to 30 ft
From the back
20 to 30 ft
Height
30 to 35 ft
See the limits for every zone
ZoneFrontEach sideRearHeightAll buildings togetherEverything built on the lot
R-2Lots of 1 acre40 ft20 ft20 ft35 ft15%20%
R-1Lots of 65,340 sq ft50 ft25 ft25 ft35 ft15%20%
R-3Lots of 35,022 sq ft40 ft25 ft25 ft35 ft40%50%
ALots of 108,900 sq ft50 ft25 ft25 ft35 ft10%20%
A-NLots of 6 acres50 ft30 ft30 ft30 ft5%10%
  • Coverage is a share of the lot.

Sheds and detached garages have their own rules. Enter your address above to see them.

Standard limits for single-family lots. Corner lots and special rules can change them. Last checked November 16, 2026. Confirm with the town before you design or buy.

Fairfield (Cumberland) zoning questions

What are the setbacks in Fairfield (Cumberland), NJ?

For a single-family house. Corner lots can differ.

  • R-2: 40 ft from the street, 20 ft on each side, 20 ft from the rear line.
  • R-1: 50 ft from the street, 25 ft on each side, 25 ft from the rear line.
  • R-3: 40 ft from the street, 25 ft on each side, 25 ft from the rear line.
  • A: 50 ft from the street, 25 ft on each side, 25 ft from the rear line.
  • A-N: 50 ft from the street, 30 ft on each side, 30 ft from the rear line.

What is the minimum lot size in Fairfield (Cumberland)?

R-2: 1 acre; R-1: 65,340 sq ft; R-3: 35,022 sq ft; A: 108,900 sq ft; A-N: 6 acres.

How tall can a house be in Fairfield (Cumberland)?

R-2: 35 ft; R-1: 35 ft; R-3: 35 ft; A: 35 ft; A-N: 30 ft.

How much of my lot can I cover in Fairfield (Cumberland)?

R-2: 15% building coverage, 20% lot coverage; R-1: 15% building coverage, 20% lot coverage; R-3: 40% building coverage, 50% lot coverage; A: 10% building coverage, 20% lot coverage; A-N: 5% building coverage, 10% lot coverage.

Can you recommend an architect in Fairfield (Cumberland)?

Yes. Tell us about your project and we'll connect you with a vetted, licensed residential architect who works in Fairfield (Cumberland). It's free and there's no obligation.

We'll connect you with a vetted, licensed residential architect who works in Fairfield (Cumberland) and can turn what your lot allows into drawings for your permit. Free, with no obligation.

Get a free architect referral

Zoning table for your drawings

ITEMREQUIREDEXISTINGPROPOSEDCOMPLIES

ENC = existing nonconforming condition, not increased. * = relief required.

Prepared with a calculation aid. Not a zoning determination. Confirm every requirement with the municipal zoning officer.

What this does not check

Where the numbers come from

Requirements were entered on November 16, 2026 from the Township of Fairfield's Chapter 450 Schedule of District Regulations (Attachment 2). Check every requirement against the current code before relying on it.

A calculation aid, not a zoning determination. Using this site means you agree to the terms of use; see also the privacy policy.

Pick a zone to startSee the table