Enter your address to find your zone and see if your project fits. No account needed.
About these numbers
Enter a single-family lot in Hopewell Township's A, R-1, R-2, R-3 or V zone and see, line by line, whether a house, addition, detached garage or shed meets the Township's lot, yard, height and coverage limits.
Covers the Township of Hopewell's single-family zones A, R-1, R-2, R-3 and V, Cumberland County. Checks a new house, an addition or an attached garage.
Hopewell (Cumberland) has 5 single-family zones covered here: A, R-1, R-2, R-3 and V. Minimum lot sizes run from 30,000 sq ft (V) to 65,340 sq ft (A) in most zones. A house must sit 15 ft (V) to 100 ft (A) back from the street and 25 ft (V) to 50 ft (A) from the rear lot line. Houses can be up to 35 ft tall. Building coverage limits run from 15% (A) to 30% (R-3).
New house or addition
Depends on your zone. Your address will show your exact numbers.
Standard limits for single-family lots. Corner lots and special rules can change them. Last checked November 15, 2026. Confirm with the town before you design or buy.
Hopewell (Cumberland) zoning questions
What are the setbacks in Hopewell (Cumberland), NJ?
For a single-family house. Corner lots can differ.
A: 100 ft from the street, 25 ft on each side, 50 ft from the rear line.
R-1: 50 ft from the street, 25 ft on each side, 50 ft from the rear line.
R-2: 40 ft from the street, 20 ft on each side, 40 ft from the rear line.
R-3: 40 ft from the street, 20 ft on each side, 40 ft from the rear line.
V: 15 ft from the street, 15 ft on each side, 25 ft from the rear line.
What is the minimum lot size in Hopewell (Cumberland)?
A: 65,340 sq ft; R-1: 65,340 sq ft; R-3: 32,670 sq ft; V: 30,000 sq ft. In the other zones it depends on the lot.
How much of my lot can I cover in Hopewell (Cumberland)?
A: 15% building coverage; R-1: 20% building coverage; R-2: 25% building coverage; R-3: 30% building coverage; V: 30% building coverage.
Can you recommend an architect in Hopewell (Cumberland)?
Yes. Tell us about your project and we'll connect you with a vetted, licensed residential architect who works in Hopewell (Cumberland). It's free and there's no obligation.
We'll connect you with a vetted, licensed residential architect who works in Hopewell (Cumberland) and can turn what your lot allows into drawings for your permit. Free, with no obligation.
Prepared with a calculation aid. Not a zoning determination. Confirm every requirement with the municipal zoning officer.
Rules that stand out
Drawn from this town's rules and the other zones on this site. Confirm each one with the zoning officer.
The full table is unlocked on this browser.
Get the full report
The check above shows whether each line complies. The full report gives every requirement for your zone and the complete table, with every line filled in and ready to copy or print onto a drawing sheet. It's a one-time purchase, and one key unlocks every town on this site, for as many projects as you like.
By buying or unlocking the full report you agree to the terms of use.
What this does not check
The averaged Village front yard.
Accessory height in A and R-1, which the schedule does not give.
The A-B, PR and business zones.
Corner lot rules, which the schedule does not state.
Pools, fences and permitted uses.
Where the numbers come from
Requirements were entered on November 15, 2026 from a published copy of the Township's Chapter 220, Attachment 1, Schedule A (Publication April 2022), amended by Ord. No. 11-07 (September 22, 2011) and Ord. No. 19-07 (July 18, 2019). Check every requirement against the current code before relying on it.
A calculation aid, not a zoning determination. Using this site means you agree to the terms of use; see also the privacy policy.