NJ Zoning Check

Union City zoning check

Enter your address to find your zone and see if your project fits. No account needed.

About these numbers

Enter a one- or two-family lot in Union City's R Residential District and see, line by line, whether a house, addition or detached garage meets the City's lot, yard, height and coverage limits. The check is free.

Covers the City of Union City's single-family zone R, Hudson County. Checks a new house, an addition, an attached garage or a detached garage or shed.

Numbers last checked November 15, 2026 against the City's Schedule of Bulk Regulations.

Check a different address

We send the address to New Jersey's public parcel records and public zoning maps to find your lot. Privacy

Know your zone? Leave the address blank.Detailed check for architects and contractors

What you can build in Union City

Union City has one single-family zone covered here, R. Each needs a lot of at least 2,500 sq ft. A house must sit 7 ft back from the street and 20 ft from the rear lot line. Houses can be up to 38 ft tall. Buildings may cover up to 65% of the lot.

New house or addition

Your address will show your exact numbers.

From the street
7 ft
From each side
2 ft
From the back
20 ft
Height
38 ft
See the limits for the R zone
ZoneFrontEach sideRearHeightAll buildings togetherEverything built on the lot
RLots of 2,500 sq ft7 ft2 ft, 5 ft total20 ft38 ft, 3 stories65%95%
  • Coverage is a share of the lot.

Sheds and detached garages have their own rules. Enter your address above to see them.

Standard limits for single-family lots. Corner lots and special rules can change them. Last checked November 15, 2026. Confirm with the town before you design or buy.

Union City zoning questions

What are the setbacks in Union City, NJ?

For a single-family house. Corner lots can differ.

  • R: 7 ft from the street, 2 ft on each side (5 ft in total), 20 ft from the rear line.

What is the minimum lot size in Union City?

R: 2,500 sq ft.

How tall can a house be in Union City?

R: 38 ft, 3 stories.

How much of my lot can I cover in Union City?

R: 65% building coverage, 95% lot coverage.

Can you recommend an architect in Union City?

Yes. Tell us about your project and we'll connect you with a vetted, licensed residential architect who works in Union City. It's free and there's no obligation.

We'll connect you with a vetted, licensed residential architect who works in Union City and can turn what your lot allows into drawings for your permit. Free, with no obligation.

Get a free architect referral

Zoning table for your drawings

ITEMREQUIREDEXISTINGPROPOSEDCOMPLIES

ENC = existing nonconforming condition, not increased. * = relief required.

Prepared with a calculation aid. Not a zoning determination. Confirm every requirement with the municipal zoning officer.

What this does not check

Where the numbers come from

Requirements were entered on November 15, 2026 from the City of Union City's Chapter 223, Land Development: Attachment 1, Schedule of Bulk Regulations (amended May 18, 2021 by Ord. No. 2021-8), and Sections 223-8 and 223-42. Check every requirement against the current code before relying on it.

A calculation aid, not a zoning determination. Using this site means you agree to the terms of use; see also the privacy policy.

Pick a zone to startSee the table