NJ Zoning Check

Secaucus zoning check

Enter your address to find your zone and see if your project fits. No account needed.

About these numbers

Enter a single-family lot in Secaucus' A or B Residential Zone and see, line by line, whether a house, addition or detached garage meets the Town's lot, yard, height and coverage limits. The check is free.

Covers the Town of Secaucus' single-family zones A and B, Hudson County. Checks a new house, an addition, an attached garage or a detached garage or shed.

Numbers last checked November 15, 2026 against the Town's online code.

Check a different address

We send the address to New Jersey's public parcel records and public zoning maps to find your lot. Privacy

Know your zone? Leave the address blank.Detailed check for architects and contractors

What you can build in Secaucus

Secaucus has 2 single-family zones covered here: A and B. Each needs a lot of at least 5,000 sq ft. Building coverage limits run from 35% (A) to 40% (B).

New house or addition

Depends on your zone. Your address will show your exact numbers.

From the street
20 ft
From each side
5 ft
From the back
Depends on your lot
Height
Depends on your lot
See the limits for every zone
ZoneFrontEach sideRearHeightAll buildings togetherEverything built on the lot
ALots of 5,000 sq ft20 ft5 ftVariesVaries35%70%
BLots of 5,000 sq ft20 ft5 ftVariesVaries40%75%
  • Varies means the limit depends on details of your lot. Check your address to see what we can work out.
  • Coverage is a share of the lot.

Sheds and detached garages have their own rules. Enter your address above to see them.

Standard limits for single-family lots. Corner lots and special rules can change them. Last checked November 15, 2026. Confirm with the town before you design or buy.

Secaucus zoning questions

What are the setbacks in Secaucus, NJ?

For a single-family house. Corner lots can differ.

  • A: 20 ft from the street, 5 ft on each side.
  • B: 20 ft from the street, 5 ft on each side.

What is the minimum lot size in Secaucus?

A: 5,000 sq ft; B: 5,000 sq ft.

How much of my lot can I cover in Secaucus?

A: 35% building coverage, 70% lot coverage; B: 40% building coverage, 75% lot coverage.

Can you recommend an architect in Secaucus?

Yes. Tell us about your project and we'll connect you with a vetted, licensed residential architect who works in Secaucus. It's free and there's no obligation.

We'll connect you with a vetted, licensed residential architect who works in Secaucus and can turn what your lot allows into drawings for your permit. Free, with no obligation.

Get a free architect referral

Zoning table for your drawings

ITEMREQUIREDEXISTINGPROPOSEDCOMPLIES

ENC = existing nonconforming condition, not increased. * = relief required.

Prepared with a calculation aid. Not a zoning determination. Confirm every requirement with the municipal zoning officer.

What this does not check

Where the numbers come from

Requirements were entered on November 15, 2026 from the Town of Secaucus' Chapter 135, Zoning, Section 135-7.1A and B, Height, area and bulk regulations for residential uses. Check every requirement against the current code before relying on it.

A calculation aid, not a zoning determination. Using this site means you agree to the terms of use; see also the privacy policy.

Pick a zone to startSee the table