NJ Zoning Check

Bayonne zoning check

Enter your address to find your zone and see if your project fits. No account needed.

About these numbers

Enter a detached single-family lot in Bayonne's R-1, R-2 or R-3 zone and see, line by line, whether a house or addition meets the City's lot, yard, height and coverage limits.

Covers the City of Bayonne's single-family zones R-1, R-2 and R-3, Hudson County. Checks a new house, an addition or an attached garage.

Numbers last checked November 4, 2026 against the City's online code.

Check a different address

We send the address to New Jersey's public parcel records and public zoning maps to find your lot. Privacy

Know your zone? Leave the address blank.Detailed check for architects and contractors

What you can build in Bayonne

Bayonne has 3 single-family zones covered here: R-1, R-2 and R-3. Each needs a lot of at least 3,000 sq ft. A house must sit 20 ft back from the street and 20 ft from the rear lot line. Houses can be up to 35 ft tall. Buildings may cover up to 70% of the lot.

New house or addition

Depends on your zone. Your address will show your exact numbers.

From the street
20 ft
From each side
3 ft
From the back
20 ft
Height
35 ft
See the limits for every zone
ZoneFrontEach sideRearHeightEverything built on the lot
R-1Lots of 3,000 sq ft20 ft3 ft20 ft35 ft, 2.5 stories70%
R-2Lots of 3,000 sq ft20 ft3 ft20 ft35 ft, 2.5 stories70%
R-3Lots of 3,000 sq ft20 ft3 ft20 ft35 ft, 2.5 stories70%
  • Coverage is a share of the lot.

Standard limits for single-family lots. Corner lots and special rules can change them. Last checked November 4, 2026. Confirm with the town before you design or buy.

Bayonne zoning questions

What are the setbacks in Bayonne, NJ?

For a single-family house. Corner lots can differ.

  • R-1: 20 ft from the street, 3 ft on each side, 20 ft from the rear line.
  • R-2: 20 ft from the street, 3 ft on each side, 20 ft from the rear line.
  • R-3: 20 ft from the street, 3 ft on each side, 20 ft from the rear line.

What is the minimum lot size in Bayonne?

R-1: 3,000 sq ft; R-2: 3,000 sq ft; R-3: 3,000 sq ft.

How tall can a house be in Bayonne?

R-1: 35 ft, 2.5 stories; R-2: 35 ft, 2.5 stories; R-3: 35 ft, 2.5 stories.

How much of my lot can I cover in Bayonne?

R-1: 70% building coverage; R-2: 70% building coverage; R-3: 70% building coverage.

Can you recommend an architect in Bayonne?

Yes. Tell us about your project and we'll connect you with a vetted, licensed residential architect who works in Bayonne. It's free and there's no obligation.

We'll connect you with a vetted, licensed residential architect who works in Bayonne and can turn what your lot allows into drawings for your permit. Free, with no obligation.

Get a free architect referral

Zoning table for your drawings

ITEMREQUIREDEXISTINGPROPOSEDCOMPLIES

ENC = existing nonconforming condition, not increased. * = relief required.

Prepared with a calculation aid. Not a zoning determination. Confirm every requirement with the municipal zoning officer.

What this does not check

Where the numbers come from

Requirements were entered on November 4, 2026 from the City's Chapter 35, Section 35-5.26, Schedule I. The code lists no new laws. Check every requirement against the current code before relying on it.

A calculation aid, not a zoning determination. Using this site means you agree to the terms of use; see also the privacy policy.

Pick a zone to startSee the table