NJ Zoning Check

Jersey City zoning check

Enter your address to find your zone and see if your project fits. No account needed.

About these numbers

Enter a lot with a detached one- or two-unit house in Jersey City's RH-1, RH-2 or R-1 district and see, line by line, whether a house, addition, shed or detached garage meets the City's lot, yard, height and coverage limits.

Covers the City of Jersey City's single-family zones RH-1, RH-2 and R-1, Hudson County. Checks a new house, an addition, an attached garage or a detached garage or shed.

Numbers last checked November 16, 2026 against the City's Land Development Ordinance, Chapter 345.

Check a different address

We send the address to New Jersey's public parcel records and public zoning maps to find your lot. Privacy

Know your zone? Leave the address blank.Detailed check for architects and contractors

What you can build in Jersey City

Jersey City has 3 single-family zones covered here: RH-1, RH-2 and R-1. Houses can be up to 35 ft tall. Buildings may cover up to 55% of the lot in the zones that set one (RH-1).

New house or addition

Depends on your zone. Your address will show your exact numbers.

From each side
2 to 5 ft
Height
35 ft
See the limits for every zone
ZoneFrontEach sideRearHeightAll buildings togetherEverything built on the lot
RH-1—5 ft—35 ft, 3 stories55%75%
RH-2—2 ft, 5.08 ft total—35 ft, 3 stories—75%
R-1—2 ft, 5.08 ft total—35 ft, 3 stories—Varies
  • Varies means the limit depends on details of your lot. Check your address to see what we can work out.
  • A dash means this check has no limit for that item.
  • Coverage is a share of the lot.

Sheds and detached garages have their own rules. Enter your address above to see them.

Standard limits for single-family lots. Corner lots and special rules can change them. Last checked November 16, 2026. Confirm with the town before you design or buy.

Jersey City zoning questions

What are the setbacks in Jersey City, NJ?

For a single-family house. Corner lots can differ.

  • RH-1: 5 ft on each side.
  • RH-2: 2 ft on each side (5.08 ft in total).
  • R-1: 2 ft on each side (5.08 ft in total).

How tall can a house be in Jersey City?

RH-1: 35 ft, 3 stories; RH-2: 35 ft, 3 stories; R-1: 35 ft, 3 stories.

How much of my lot can I cover in Jersey City?

RH-1: 55% building coverage, 75% lot coverage; RH-2: 75% lot coverage. In the other zones it depends on the lot.

Can you recommend an architect in Jersey City?

Yes. Tell us about your project and we'll connect you with a vetted, licensed residential architect who works in Jersey City. It's free and there's no obligation.

We'll connect you with a vetted, licensed residential architect who works in Jersey City and can turn what your lot allows into drawings for your permit. Free, with no obligation.

Get a free architect referral

Zoning table for your drawings

ITEMREQUIREDEXISTINGPROPOSEDCOMPLIES

ENC = existing nonconforming condition, not increased. * = relief required.

Prepared with a calculation aid. Not a zoning determination. Confirm every requirement with the municipal zoning officer.

What this does not check

Where the numbers come from

Requirements were entered on November 16, 2026 from the City of Jersey City's Land Development Ordinance, Chapter 345, Sections 345-40, 345-40.1 and 345-41. Check every requirement against the current code before relying on it.

A calculation aid, not a zoning determination. Using this site means you agree to the terms of use; see also the privacy policy.

Pick a zone to startSee the table