NJ Zoning Check

Guttenberg zoning check

Enter your address to find your zone and see if your project fits. No account needed.

About these numbers

Enter a lot in Guttenberg's R-1 Low Density Residential Zone and see, line by line, whether a house or addition meets the Town's lot, yard, height and coverage limits. The check is free.

Covers the Town of Guttenberg's single-family zone R-1, Hudson County. Checks a new house, an addition or an attached garage.

Numbers last checked November 15, 2026 against the Town's Schedule of District Regulations.

Check a different address

We send the address to New Jersey's public parcel records and public zoning maps to find your lot. Privacy

Know your zone? Leave the address blank.Detailed check for architects and contractors

What you can build in Guttenberg

Guttenberg has one single-family zone covered here, R-1. Each needs a lot of at least 2,500 sq ft. Houses can be up to 35 ft tall. Buildings may cover up to 40% of the lot.

New house or addition

Your address will show your exact numbers.

From each side
2 ft
From the back
25 ft
Height
35 ft
See the limits for the R-1 zone
ZoneFrontEach sideRearHeightAll buildings togetherEverything built on the lot
R-1Lots of 2,500 sq ft—2 ft, 5.08 ft total25 ft35 ft, 3 stories40%75%
  • A dash means this check has no limit for that item.
  • Coverage is a share of the lot.

Standard limits for single-family lots. Corner lots and special rules can change them. Last checked November 15, 2026. Confirm with the town before you design or buy.

Guttenberg zoning questions

What are the setbacks in Guttenberg, NJ?

For a single-family house. Corner lots can differ.

  • R-1: 2 ft on each side (5.08 ft in total), 25 ft from the rear line.

What is the minimum lot size in Guttenberg?

R-1: 2,500 sq ft.

How tall can a house be in Guttenberg?

R-1: 35 ft, 3 stories.

How much of my lot can I cover in Guttenberg?

R-1: 40% building coverage, 75% lot coverage.

Can you recommend an architect in Guttenberg?

Yes. Tell us about your project and we'll connect you with a vetted, licensed residential architect who works in Guttenberg. It's free and there's no obligation.

We'll connect you with a vetted, licensed residential architect who works in Guttenberg and can turn what your lot allows into drawings for your permit. Free, with no obligation.

Get a free architect referral

Zoning table for your drawings

ITEMREQUIREDEXISTINGPROPOSEDCOMPLIES

ENC = existing nonconforming condition, not increased. * = relief required.

Prepared with a calculation aid. Not a zoning determination. Confirm every requirement with the municipal zoning officer.

What this does not check

Where the numbers come from

Requirements were entered on November 15, 2026 from the Town of Guttenberg's Chapter 28, Zoning, Attachment 2, Schedule of District Regulations (Subsection 28-4.4; publication May 2020). Check every requirement against the current code before relying on it.

A calculation aid, not a zoning determination. Using this site means you agree to the terms of use; see also the privacy policy.

Pick a zone to startSee the table