NJ Zoning Check

Somers Point zoning check

Enter your address to find your zone and see if your project fits. No account needed.

About these numbers

Enter a lot in Somers Point's R-1 Single-Family Residential District and see, line by line, whether a house, addition or detached garage or shed meets the City's lot, yard, height and coverage limits. The check is free.

Covers the City of Somers Point's single-family zone R-1, Atlantic County. Checks a new house, an addition, an attached garage or a detached garage or shed.

Numbers last checked November 16, 2026 against Section 114-12 of the City's development regulations.

Check a different address

We send the address to New Jersey's public parcel records and public zoning maps to find your lot. Privacy

Know your zone? Leave the address blank.Detailed check for architects and contractors

What you can build in Somers Point

Somers Point has one single-family zone covered here, R-1. Each needs a lot of at least 7,500 sq ft. A house must sit 20 ft back from the street and 35 ft from the rear lot line. Houses can be up to 35 ft tall. Buildings may cover up to 30% of the lot.

New house or addition

Your address will show your exact numbers.

From the street
20 ft
From each side
10 ft
From the back
35 ft
Height
35 ft
See the limits for the R-1 zone
ZoneFrontEach sideRearHeightAll buildings togetherEverything built on the lot
R-1Lots of 7,500 sq ft20 ft10 ft35 ft35 ft30%60%
  • Coverage is a share of the lot.

Sheds and detached garages have their own rules. Enter your address above to see them.

Standard limits for single-family lots. Corner lots and special rules can change them. Last checked November 16, 2026. Confirm with the town before you design or buy.

Somers Point zoning questions

What are the setbacks in Somers Point, NJ?

For a single-family house. Corner lots can differ.

  • R-1: 20 ft from the street, 10 ft on each side, 35 ft from the rear line.

What is the minimum lot size in Somers Point?

R-1: 7,500 sq ft.

How tall can a house be in Somers Point?

R-1: 35 ft.

How much of my lot can I cover in Somers Point?

R-1: 30% building coverage, 60% lot coverage.

Can you recommend an architect in Somers Point?

Yes. Tell us about your project and we'll connect you with a vetted, licensed residential architect who works in Somers Point. It's free and there's no obligation.

We'll connect you with a vetted, licensed residential architect who works in Somers Point and can turn what your lot allows into drawings for your permit. Free, with no obligation.

Get a free architect referral

Zoning table for your drawings

ITEMREQUIREDEXISTINGPROPOSEDCOMPLIES

ENC = existing nonconforming condition, not increased. * = relief required.

Prepared with a calculation aid. Not a zoning determination. Confirm every requirement with the municipal zoning officer.

What this does not check

Where the numbers come from

Requirements were entered on November 16, 2026 from the City of Somers Point's Chapter 114, Development Regulations, Sections 114-12 and 114-13 and Attachment 1. Check every requirement against the current code before relying on it.

A calculation aid, not a zoning determination. Using this site means you agree to the terms of use; see also the privacy policy.

Pick a zone to startSee the table