NJ Zoning Check

Hammonton zoning check

Enter your address to find your zone and see if your project fits. No account needed.

About these numbers

Enter a lot with a house in Hammonton's R-1 or R-2 district and see, line by line, whether a house, addition, shed or detached garage meets the Town's lot, yard and height limits.

Covers the Town of Hammonton's single-family zones R-1, R-1-2F, R-2 and R-2-2F, Atlantic County. Checks a new house, an addition, an attached garage or a detached garage or shed.

Numbers last checked November 16, 2026 against the Town's Chapter 175, Sections 175-151, 175-152, 175-87 and 175-106.

Check a different address

We send the address to New Jersey's public parcel records and public zoning maps to find your lot. Privacy

Know your zone? Leave the address blank.Detailed check for architects and contractors

What you can build in Hammonton

Hammonton has 4 single-family zones covered here: R-1, R-1-2F, R-2 and R-2-2F. Minimum lot sizes run from 12,500 sq ft (R-1) to 18,000 sq ft (R-1-2F). A house must sit 30 ft back from the street and 30 ft from the rear lot line. Houses can be up to 35 ft tall.

New house or addition

Depends on your zone. Your address will show your exact numbers.

From the street
30 ft
From each side
10 to 15 ft
From the back
30 ft
Height
35 ft
See the limits for every zone
ZoneFrontEach sideRearHeight
R-1Lots of 12,500 sq ft30 ft10 ft30 ft35 ft
R-1-2FLots of 18,000 sq ft30 ft15 ft30 ft35 ft
R-2Lots of 12,500 sq ft30 ft10 ft30 ft35 ft
R-2-2FLots of 18,000 sq ft30 ft15 ft30 ft35 ft

Sheds and detached garages have their own rules. Enter your address above to see them.

Standard limits for single-family lots. Corner lots and special rules can change them. Last checked November 16, 2026. Confirm with the town before you design or buy.

Hammonton zoning questions

What are the setbacks in Hammonton, NJ?

For a single-family house. Corner lots can differ.

  • R-1: 30 ft from the street, 10 ft on each side, 30 ft from the rear line.
  • R-1-2F: 30 ft from the street, 15 ft on each side, 30 ft from the rear line.
  • R-2: 30 ft from the street, 10 ft on each side, 30 ft from the rear line.
  • R-2-2F: 30 ft from the street, 15 ft on each side, 30 ft from the rear line.

What is the minimum lot size in Hammonton?

R-1: 12,500 sq ft; R-1-2F: 18,000 sq ft; R-2: 12,500 sq ft; R-2-2F: 18,000 sq ft.

How tall can a house be in Hammonton?

R-1: 35 ft; R-1-2F: 35 ft; R-2: 35 ft; R-2-2F: 35 ft.

Can you recommend an architect in Hammonton?

Yes. Tell us about your project and we'll connect you with a vetted, licensed residential architect who works in Hammonton. It's free and there's no obligation.

We'll connect you with a vetted, licensed residential architect who works in Hammonton and can turn what your lot allows into drawings for your permit. Free, with no obligation.

Get a free architect referral

Zoning table for your drawings

ITEMREQUIREDEXISTINGPROPOSEDCOMPLIES

ENC = existing nonconforming condition, not increased. * = relief required.

Prepared with a calculation aid. Not a zoning determination. Confirm every requirement with the municipal zoning officer.

What this does not check

Where the numbers come from

Requirements were entered on November 16, 2026 from the Town of Hammonton's Chapter 175, Land Development, Sections 175-151, 175-152, 175-87 and 175-106. Check every requirement against the current code before relying on it.

A calculation aid, not a zoning determination. Using this site means you agree to the terms of use; see also the privacy policy.

Pick a zone to startSee the table