NJ Zoning Check

Longport zoning check

Enter your address to find your zone and see if your project fits. No account needed.

About these numbers

Enter a lot in one of Longport's single-family districts and see, line by line, whether a new house or addition meets the Borough's lot, yard, height, coverage and floor area limits. The check is free.

Covers the Borough of Longport's single-family zones RSF-1, RSF-2 and RSF-3, Atlantic County. Checks a new house, an addition or an attached garage.

Numbers last checked November 16, 2026 against the Borough's Sections 167-7, 167-10 and 167-17.1 to 167-17.3.

Check a different address

We send the address to New Jersey's public parcel records and public zoning maps to find your lot. Privacy

Know your zone? Leave the address blank.Detailed check for architects and contractors

What you can build in Longport

Longport has 3 single-family zones covered here: RSF-1, RSF-2 and RSF-3. Minimum lot sizes run from 3,000 sq ft (RSF-3) to 4,500 sq ft (RSF-1). A house must sit 6 ft (RSF-3) to 10 ft (RSF-1) back from the street and 10 ft (RSF-3) to 15 ft (RSF-1) from the rear lot line. Houses can be up to 29.5 ft tall. Buildings may cover up to 45% of the lot.

New house or addition

Depends on your zone. Your address will show your exact numbers.

From the street
6 to 10 ft
From each side
Depends on your lot
From the back
10 to 15 ft
Height
29.5 ft
See the limits for every zone
ZoneFrontEach sideRearHeightAll buildings togetherEverything built on the lot
RSF-1Lots of 4,500 sq ft10 ftVaries15 ft29.5 ft45%70%
RSF-2Lots of 4,030 sq ft10 ftVaries15 ft29.5 ft45%70%
RSF-3Lots of 3,000 sq ft6 ftVaries10 ft29.5 ft45%70%
  • Varies means the limit depends on details of your lot. Check your address to see what we can work out.
  • Coverage is a share of the lot.

Standard limits for single-family lots. Corner lots and special rules can change them. Last checked November 16, 2026. Confirm with the town before you design or buy.

Longport zoning questions

What are the setbacks in Longport, NJ?

For a single-family house. Corner lots can differ.

  • RSF-1: 10 ft from the street, 15 ft from the rear line.
  • RSF-2: 10 ft from the street, 15 ft from the rear line.
  • RSF-3: 6 ft from the street, 10 ft from the rear line.

What is the minimum lot size in Longport?

RSF-1: 4,500 sq ft; RSF-2: 4,030 sq ft; RSF-3: 3,000 sq ft.

How tall can a house be in Longport?

RSF-1: 29.5 ft; RSF-2: 29.5 ft; RSF-3: 29.5 ft.

How much of my lot can I cover in Longport?

RSF-1: 45% building coverage, 70% lot coverage; RSF-2: 45% building coverage, 70% lot coverage; RSF-3: 45% building coverage, 70% lot coverage.

Can you recommend an architect in Longport?

Yes. Tell us about your project and we'll connect you with a vetted, licensed residential architect who works in Longport. It's free and there's no obligation.

We'll connect you with a vetted, licensed residential architect who works in Longport and can turn what your lot allows into drawings for your permit. Free, with no obligation.

Get a free architect referral

Zoning table for your drawings

ITEMREQUIREDEXISTINGPROPOSEDCOMPLIES

ENC = existing nonconforming condition, not increased. * = relief required.

Prepared with a calculation aid. Not a zoning determination. Confirm every requirement with the municipal zoning officer.

What this does not check

Where the numbers come from

Requirements were entered on November 16, 2026 from the Borough of Longport's Chapter 167, Zoning, Sections 167-7, 167-10 and 167-17.1 to 167-17.3. Check every requirement against the current code before relying on it.

A calculation aid, not a zoning determination. Using this site means you agree to the terms of use; see also the privacy policy.

Pick a zone to startSee the table