Enter your address to find your zone and see if your project fits. No account needed.
About these numbers
Enter a lot with a house in Corbin City and see, line by line, whether a house, addition, shed or detached garage meets the City's lot, yard, coverage and height limits.
Covers the City of Corbin City's single-family zones R-1, R2, RR and R5, Atlantic County. Checks a new house, an addition, an attached garage or a detached garage or shed.
Corbin City has 4 single-family zones covered here: R-1, R2, RR and R5. Minimum lot sizes run from 1 acre (R-1) to 5 acres (R5). A house must sit 50 ft (R-1) to 100 ft (R5) back from the street and 35 ft (RR) to 100 ft (R5) from the rear lot line. Houses can be up to 35 ft tall. Lot coverage limits run from 5% (R5) to 15% (R-1).
New house or addition
Depends on your zone. Your address will show your exact numbers.
From the street
50 to 100 ft
From each side
15 to 50 ft
From the back
35 to 100 ft
Height
35 ft
See the limits for every zone
Zone
Front
Each side
Rear
Height
Everything built on the lot
R-1Lots of 1 acre
50 ft
15 ft, 35 ft total
50 ft
35 ft
15%
R2Lots of 2 acres
50 ft
15 ft, 35 ft total
50 ft
35 ft
10%
RRLots of 2 acres
50 ft
15 ft, 35 ft total
35 ft
35 ft
15%
R5Lots of 5 acres
100 ft
50 ft
100 ft
35 ft
5%
Coverage is a share of the lot.
Sheds and detached garages have their own rules. Enter your address above to see them.
Standard limits for single-family lots. Corner lots and special rules can change them. Last checked November 16, 2026. Confirm with the town before you design or buy.
Corbin City zoning questions
What are the setbacks in Corbin City, NJ?
For a single-family house. Corner lots can differ.
R-1: 50 ft from the street, 15 ft on each side (35 ft in total), 50 ft from the rear line.
R2: 50 ft from the street, 15 ft on each side (35 ft in total), 50 ft from the rear line.
RR: 50 ft from the street, 15 ft on each side (35 ft in total), 35 ft from the rear line.
R5: 100 ft from the street, 50 ft on each side, 100 ft from the rear line.
R-1: 15% lot coverage; R2: 10% lot coverage; RR: 15% lot coverage; R5: 5% lot coverage.
Can you recommend an architect in Corbin City?
Yes. Tell us about your project and we'll connect you with a vetted, licensed residential architect who works in Corbin City. It's free and there's no obligation.
We'll connect you with a vetted, licensed residential architect who works in Corbin City and can turn what your lot allows into drawings for your permit. Free, with no obligation.
Prepared with a calculation aid. Not a zoning determination. Confirm every requirement with the municipal zoning officer.
Rules that stand out
Drawn from this town's rules and the other zones on this site. Confirm each one with the zoning officer.
The full table is unlocked on this browser.
Get the full report
The check above shows whether each line complies. The full report gives every requirement for your zone and the complete table, with every line filled in and ready to copy or print onto a drawing sheet. It's a one-time purchase, and one key unlocks every town on this site, for as many projects as you like.
By buying or unlocking the full report you agree to the terms of use.
What this does not check
The limits of four accessory structures (two buildings) covering no more than 2% of the lot.
Docks, fences and the T, VC, HC and C districts.
Where the numbers come from
Requirements were entered on November 16, 2026 from the City of Corbin City's Chapter 102, Sections 102-4.2, 102-4.3, 102-5.3, 102-6.3 and 102-7.3. Check every requirement against the current code before relying on it.
A calculation aid, not a zoning determination. Using this site means you agree to the terms of use; see also the privacy policy.