NJ Zoning Check

Hightstown zoning check

Enter your address to find your zone and see if your project fits. No account needed.

About these numbers

Enter a single-family lot in Hightstown's R-1, R-2 or R-3 zone and see, line by line, whether a house or addition meets the Borough's lot, yard, height and coverage limits.

Covers the Borough of Hightstown's single-family zones R-1, R-2 and R-3, Mercer County. Checks a new house, an addition or an attached garage.

Numbers last checked November 4, 2026 against the Borough's online code.

Check a different address

We send the address to New Jersey's public parcel records and public zoning maps to find your lot. Privacy

Know your zone? Leave the address blank.Detailed check for architects and contractors

What you can build in Hightstown

Hightstown has 3 single-family zones covered here: R-1, R-2 and R-3. Minimum lot sizes run from 10,000 sq ft (R-3) to 15,000 sq ft (R-1). A house must sit 25 ft (R-3) to 35 ft (R-1) back from the street and 35 ft (R-3) to 45 ft (R-1) from the rear lot line. Houses can be up to 35 ft tall. Building coverage limits run from 20% (R-1) to 30% (R-3).

New house or addition

Depends on your zone. Your address will show your exact numbers.

From the street
25 to 35 ft
From each side
10 to 15 ft
From the back
35 to 45 ft
Height
35 ft
See the limits for every zone
ZoneFrontEach sideRearHeightAll buildings togetherTotal lot coverage
R-1Lots of 15,000 sq ft35 ft15 ft, 35 ft total45 ft35 ft, 2.5 stories20%35%
R-2Lots of 12,000 sq ft30 ft15 ft, 35 ft total40 ft35 ft, 2.5 stories20%35%
R-3Lots of 10,000 sq ft25 ft10 ft, 25 ft total35 ft35 ft, 2.5 stories30%40%
  • Coverage is a share of the lot.

Standard limits for single-family lots. Corner lots and special rules can change them. Last checked November 4, 2026. Confirm with the town before you design or buy.

Hightstown zoning questions

What are the setbacks in Hightstown, NJ?

For a single-family house. Corner lots can differ.

  • R-1: 35 ft from the street, 15 ft on each side (35 ft in total), 45 ft from the rear line.
  • R-2: 30 ft from the street, 15 ft on each side (35 ft in total), 40 ft from the rear line.
  • R-3: 25 ft from the street, 10 ft on each side (25 ft in total), 35 ft from the rear line.

What is the minimum lot size in Hightstown?

R-1: 15,000 sq ft; R-2: 12,000 sq ft; R-3: 10,000 sq ft.

How tall can a house be in Hightstown?

R-1: 35 ft, 2.5 stories; R-2: 35 ft, 2.5 stories; R-3: 35 ft, 2.5 stories.

How much of my lot can I cover in Hightstown?

R-1: 20% building coverage, 35% lot coverage; R-2: 20% building coverage, 35% lot coverage; R-3: 30% building coverage, 40% lot coverage.

Can you recommend an architect in Hightstown?

Yes. Tell us about your project and we'll connect you with a vetted, licensed residential architect who works in Hightstown. It's free and there's no obligation.

We'll connect you with a vetted, licensed residential architect who works in Hightstown and can turn what your lot allows into drawings for your permit. Free, with no obligation.

Get a free architect referral

Zoning table for your drawings

ITEMREQUIREDEXISTINGPROPOSEDCOMPLIES

ENC = existing nonconforming condition, not increased. * = relief required.

Prepared with a calculation aid. Not a zoning determination. Confirm every requirement with the municipal zoning officer.

What this does not check

Where the numbers come from

Requirements were entered on November 4, 2026 from the Borough's Chapter 28, Zoning, Article 28-3, the R-1, R-2 and R-3 district sections. Ordinances 2025-05, 2025-10 and 2026-04 were read and do not change these districts. Check every requirement against the current code before relying on it.

A calculation aid, not a zoning determination. Using this site means you agree to the terms of use; see also the privacy policy.

Pick a zone to startSee the table