NJ Zoning Check

Elizabeth zoning check

Enter your address to find your zone and see if your project fits. No account needed.

About these numbers

Enter a lot with a one- or two-family house in Elizabeth's R-1 or R-2 zone and see, line by line, whether a house, addition, shed or detached garage meets the City's lot, yard, height and impervious coverage limits.

Covers the City of Elizabeth's single-family zones R-1 and R-2, Union County. Checks a new house, an addition, an attached garage or a detached garage or shed.

Numbers last checked November 16, 2026 against the City's Code of Ordinances, Chapter 17.36.

Check a different address

We send the address to New Jersey's public parcel records and public zoning maps to find your lot. Privacy

Know your zone? Leave the address blank.Detailed check for architects and contractors

What you can build in Elizabeth

Elizabeth has 2 single-family zones covered here: R-1 and R-2. Houses can be up to 38 ft tall.

New house or addition

Depends on your zone. Your address will show your exact numbers.

From the street
20 ft
From each side
Depends on your lot
From the back
Depends on your lot
Height
38 ft
See the limits for every zone
ZoneFrontEach sideRearHeightEverything paved or built
R-120 ftVariesVaries38 ft, 3 storiesVaries
R-220 ftVariesVaries38 ft, 3 storiesVaries
  • Varies means the limit depends on details of your lot. Check your address to see what we can work out.
  • Coverage is a share of the lot.

Sheds and detached garages have their own rules. Enter your address above to see them.

Standard limits for single-family lots. Corner lots and special rules can change them. Last checked November 16, 2026. Confirm with the town before you design or buy.

Elizabeth zoning questions

What are the setbacks in Elizabeth, NJ?

For a single-family house. Corner lots can differ.

  • R-1: 20 ft from the street.
  • R-2: 20 ft from the street.

How tall can a house be in Elizabeth?

R-1: 38 ft, 3 stories; R-2: 38 ft, 3 stories.

Can you recommend an architect in Elizabeth?

Yes. Tell us about your project and we'll connect you with a vetted, licensed residential architect who works in Elizabeth. It's free and there's no obligation.

We'll connect you with a vetted, licensed residential architect who works in Elizabeth and can turn what your lot allows into drawings for your permit. Free, with no obligation.

Get a free architect referral

Zoning table for your drawings

ITEMREQUIREDEXISTINGPROPOSEDCOMPLIES

ENC = existing nonconforming condition, not increased. * = relief required.

Prepared with a calculation aid. Not a zoning determination. Confirm every requirement with the municipal zoning officer.

What this does not check

Where the numbers come from

Requirements were entered on November 16, 2026 from the City of Elizabeth's Code of Ordinances, Title 17, Chapter 17.36 (Sections 17.36.100, 17.36.110, 17.36.120 and the accessory building and impervious coverage rules). Check every requirement against the current code before relying on it.

A calculation aid, not a zoning determination. Using this site means you agree to the terms of use; see also the privacy policy.

Pick a zone to startSee the table