NJ Zoning Check

Clark zoning check

Enter your address to find your zone and see if your project fits. No account needed.

About these numbers

Enter a lot in Clark's R-150, R-100, R-75 or R-60 zone and see, line by line, whether a house or addition meets the Township's lot, yard, height, coverage and floor area limits.

Covers the Township of Clark's single-family zones R-150, R-100, R-75 and R-60, Union County. Checks a new house, an addition or an attached garage.

Numbers last checked November 11, 2026 against a published copy of Sections 195-124 to 195-127 of the Township's code.

Check a different address

We send the address to New Jersey's public parcel records and public zoning maps to find your lot. Privacy

Know your zone? Leave the address blank.Detailed check for architects and contractors

What you can build in Clark

Clark has 4 single-family zones covered here: R-150, R-100, R-75 and R-60. Minimum lot sizes run from 6,000 sq ft (R-60) to 15,000 sq ft (R-150). Houses can be up to 35 ft tall. Building coverage limits run from 15% (R-150) to 30% (R-75).

New house or addition

Depends on your zone. Your address will show your exact numbers.

From the street
Depends on your lot
From each side
8 to 15 ft
From the back
20 to 35 ft
Height
35 ft
See the limits for every zone
ZoneFrontEach sideRearHeightEverything built on the lotImpervious cover
R-150Lots of 15,000 sq ftVaries15 ft35 ft35 ft, 2.5 stories15%50%
R-100Lots of 10,000 sq ftVaries10 ft, 25 ft total25 ft35 ft, 2.5 stories20%50%
R-75Lots of 7,500 sq ftVaries8 ft, 20 ft total20 ft35 ft, 2.5 stories30%50%
R-60Lots of 6,000 sq ftVaries8 ft, 18 ft total20 ft35 ft, 2.5 stories30%50%
  • Varies means the limit depends on details of your lot. Check your address to see what we can work out.
  • Coverage is a share of the lot.

Standard limits for single-family lots. Corner lots and special rules can change them. Last checked November 11, 2026. Confirm with the town before you design or buy.

Clark zoning questions

What are the setbacks in Clark, NJ?

For a single-family house. Corner lots can differ.

  • R-150: 15 ft on each side, 35 ft from the rear line.
  • R-100: 10 ft on each side (25 ft in total), 25 ft from the rear line.
  • R-75: 8 ft on each side (20 ft in total), 20 ft from the rear line.
  • R-60: 8 ft on each side (18 ft in total), 20 ft from the rear line.

What is the minimum lot size in Clark?

R-150: 15,000 sq ft; R-100: 10,000 sq ft; R-75: 7,500 sq ft; R-60: 6,000 sq ft.

How tall can a house be in Clark?

R-150: 35 ft, 2.5 stories; R-100: 35 ft, 2.5 stories; R-75: 35 ft, 2.5 stories; R-60: 35 ft, 2.5 stories.

How much of my lot can I cover in Clark?

R-150: 15% building coverage, 50% lot coverage; R-100: 20% building coverage, 50% lot coverage; R-75: 30% building coverage, 50% lot coverage; R-60: 30% building coverage, 50% lot coverage.

Can you recommend an architect in Clark?

Yes. Tell us about your project and we'll connect you with a vetted, licensed residential architect who works in Clark. It's free and there's no obligation.

We'll connect you with a vetted, licensed residential architect who works in Clark and can turn what your lot allows into drawings for your permit. Free, with no obligation.

Get a free architect referral

Zoning table for your drawings

ITEMREQUIREDEXISTINGPROPOSEDCOMPLIES

ENC = existing nonconforming condition, not increased. * = relief required.

Prepared with a calculation aid. Not a zoning determination. Confirm every requirement with the municipal zoning officer.

What this does not check

Where the numbers come from

Requirements were entered on November 11, 2026 from a published copy of Sections 195-124 to 195-127 of the Township of Clark's code, read twice. The Township's own online code pages would not display these lists on that date, so they were not compared with it. Check every requirement against the current code, including any later ordinances, before relying on it.

A calculation aid, not a zoning determination. Using this site means you agree to the terms of use; see also the privacy policy.

Pick a zone to startSee the table