NJ Zoning Check

Roseland zoning check

Enter your address to find your zone and see if your project fits. No account needed.

About these numbers

Enter a single-family lot in Roseland's R-1, R-2, R-3 or R-4 zone and see, line by line, whether a house or addition meets the Borough's lot, yard, height and coverage limits. The check is free.

Covers the Borough of Roseland's single-family zones R-1, R-2, R-3 and R-4, Essex County. Checks a new house, an addition or an attached garage.

Numbers last checked November 15, 2026 against the Borough's Schedule I.

Check a different address

We send the address to New Jersey's public parcel records and public zoning maps to find your lot. Privacy

Know your zone? Leave the address blank.Detailed check for architects and contractors

What you can build in Roseland

Roseland has 4 single-family zones covered here: R-1, R-2, R-3 and R-4. Minimum lot sizes run from 11,250 sq ft (R-4) to 45,000 sq ft (R-1). A house must sit 30 ft (R-4) to 70 ft (R-1) back from the street and 50 ft (R-3) to 100 ft (R-1) from the rear lot line. Houses can be up to 35 ft tall. Building coverage limits run from 20% (R-1) to 25% (R-4).

New house or addition

Depends on your zone. Your address will show your exact numbers.

From the street
30 to 70 ft
From each side
12 to 35 ft
From the back
50 to 100 ft
Height
35 ft
See the limits for every zone
ZoneFrontEach sideRearHeightAll buildings togetherEverything paved or built
R-1Lots of 45,000 sq ft70 ft35 ft100 ft35 ft20%30%
R-2Lots of 30,000 sq ft50 ft35 ft70 ft35 ft20%30%
R-3Lots of 20,000 sq ft50 ft20 ft50 ft35 ft20%30%
R-4Lots of 11,250 sq ft30 ft12 ft50 ft35 ft25%35%
  • Coverage is a share of the lot.

Standard limits for single-family lots. Corner lots and special rules can change them. Last checked November 15, 2026. Confirm with the town before you design or buy.

Roseland zoning questions

What are the setbacks in Roseland, NJ?

For a single-family house. Corner lots can differ.

  • R-1: 70 ft from the street, 35 ft on each side, 100 ft from the rear line.
  • R-2: 50 ft from the street, 35 ft on each side, 70 ft from the rear line.
  • R-3: 50 ft from the street, 20 ft on each side, 50 ft from the rear line.
  • R-4: 30 ft from the street, 12 ft on each side, 50 ft from the rear line.

What is the minimum lot size in Roseland?

R-1: 45,000 sq ft; R-2: 30,000 sq ft; R-3: 20,000 sq ft; R-4: 11,250 sq ft.

How tall can a house be in Roseland?

R-1: 35 ft; R-2: 35 ft; R-3: 35 ft; R-4: 35 ft.

How much of my lot can I cover in Roseland?

R-1: 20% building coverage, 30% lot coverage; R-2: 20% building coverage, 30% lot coverage; R-3: 20% building coverage, 30% lot coverage; R-4: 25% building coverage, 35% lot coverage.

Can you recommend an architect in Roseland?

Yes. Tell us about your project and we'll connect you with a vetted, licensed residential architect who works in Roseland. It's free and there's no obligation.

We'll connect you with a vetted, licensed residential architect who works in Roseland and can turn what your lot allows into drawings for your permit. Free, with no obligation.

Get a free architect referral

Zoning table for your drawings

ITEMREQUIREDEXISTINGPROPOSEDCOMPLIES

ENC = existing nonconforming condition, not increased. * = relief required.

Prepared with a calculation aid. Not a zoning determination. Confirm every requirement with the municipal zoning officer.

What this does not check

Where the numbers come from

Requirements were entered on November 15, 2026 from the Borough of Roseland's Chapter 30, Land Development, Attachment 4, Appendix D - Schedule I, Schedule of Zone Districts, which Section 30-404.1 (amended April 23, 2024 by Ordinance 04-2024) refers to. Check every requirement against the current code before relying on it.

A calculation aid, not a zoning determination. Using this site means you agree to the terms of use; see also the privacy policy.

Pick a zone to startSee the table