NJ Zoning Check

Belleville zoning check

Enter your address to find your zone and see if your project fits. No account needed.

About these numbers

Enter a one-family lot in Belleville's R-A1, R-A2 or R-C district and see, line by line, whether a house or addition meets the Township's lot, yard, height and coverage limits. The check is free.

Covers the Township of Belleville's single-family zones R-A1, R-A2 and R-C, Essex County. Checks a new house, an addition or an attached garage.

Numbers last checked November 15, 2026 against the Township's Schedule of District Regulations.

Check a different address

We send the address to New Jersey's public parcel records and public zoning maps to find your lot. Privacy

Know your zone? Leave the address blank.Detailed check for architects and contractors

What you can build in Belleville

Belleville has 3 single-family zones covered here: R-A1, R-A2 and R-C. Minimum lot sizes run from 4,000 sq ft (R-A2) to 5,000 sq ft (R-A1). A house must sit 20 ft back from the street and 20 ft (R-A1) to 25 ft (R-C) from the rear lot line. Houses can be up to 40 ft tall. Building coverage limits run from 35% (R-A1) to 45% (R-C).

New house or addition

Depends on your zone. Your address will show your exact numbers.

From the street
20 ft
From each side
4 to 5 ft
From the back
20 to 25 ft
Height
40 ft
See the limits for every zone
ZoneFrontEach sideRearHeightAll buildings togetherEverything built on the lot
R-A1Lots of 5,000 sq ft20 ft5 ft, 14 ft total20 ft40 ft, 3 stories35%50%
R-A2Lots of 4,000 sq ft20 ft4 ft, 14 ft total20 ft40 ft, 3 stories35%50%
R-CLots of 5,000 sq ft20 ft5 ft25 ft40 ft, 3 stories45%60%
  • Coverage is a share of the lot.

Standard limits for single-family lots. Corner lots and special rules can change them. Last checked November 15, 2026. Confirm with the town before you design or buy.

Belleville zoning questions

What are the setbacks in Belleville, NJ?

For a single-family house. Corner lots can differ.

  • R-A1: 20 ft from the street, 5 ft on each side (14 ft in total), 20 ft from the rear line.
  • R-A2: 20 ft from the street, 4 ft on each side (14 ft in total), 20 ft from the rear line.
  • R-C: 20 ft from the street, 5 ft on each side, 25 ft from the rear line.

What is the minimum lot size in Belleville?

R-A1: 5,000 sq ft; R-A2: 4,000 sq ft; R-C: 5,000 sq ft.

How tall can a house be in Belleville?

R-A1: 40 ft, 3 stories; R-A2: 40 ft, 3 stories; R-C: 40 ft, 3 stories.

How much of my lot can I cover in Belleville?

R-A1: 35% building coverage, 50% lot coverage; R-A2: 35% building coverage, 50% lot coverage; R-C: 45% building coverage, 60% lot coverage.

Can you recommend an architect in Belleville?

Yes. Tell us about your project and we'll connect you with a vetted, licensed residential architect who works in Belleville. It's free and there's no obligation.

We'll connect you with a vetted, licensed residential architect who works in Belleville and can turn what your lot allows into drawings for your permit. Free, with no obligation.

Get a free architect referral

Zoning table for your drawings

ITEMREQUIREDEXISTINGPROPOSEDCOMPLIES

ENC = existing nonconforming condition, not increased. * = relief required.

Prepared with a calculation aid. Not a zoning determination. Confirm every requirement with the municipal zoning officer.

What this does not check

Where the numbers come from

Requirements were entered on November 15, 2026 from the Township of Belleville's Chapter 23, Zoning, Section 23-3, Schedule of District Regulations, including notes a to i. Check every requirement against the current code before relying on it.

A calculation aid, not a zoning determination. Using this site means you agree to the terms of use; see also the privacy policy.

Pick a zone to startSee the table