NJ Zoning Check

Fairfield (Essex) zoning check

Enter your address to find your zone and see if your project fits. No account needed.

About these numbers

Enter a single-family lot in Fairfield's R-1, R-2 or R-5 zone and see, line by line, whether a house, addition or detached garage meets the Township's lot, yard, height, floor area and coverage limits. The check is free.

Covers the Township of Fairfield's single-family zones R-1, R-2 and R-5, Essex County. Checks a new house, an addition, an attached garage or a detached garage or shed.

Numbers last checked November 15, 2026 against the Township's Schedule of Area, Yard and Building Regulations.

Check a different address

We send the address to New Jersey's public parcel records and public zoning maps to find your lot. Privacy

Know your zone? Leave the address blank.Detailed check for architects and contractors

What you can build in Fairfield (Essex)

Fairfield (Essex) has 3 single-family zones covered here: R-1, R-2 and R-5. Minimum lot sizes run from 6,000 sq ft (R-5) to 2 acres (R-2). A house must sit 20 ft (R-5) to 40 ft (R-2) back from the street and 15 ft (R-5) to 60 ft (R-2) from the rear lot line. Houses can be up to 35 ft tall. Building coverage limits run from 7.5% (R-2) to 35% (R-5).

New house or addition

Depends on your zone. Your address will show your exact numbers.

From the street
20 to 40 ft
From each side
10 to 15 ft
From the back
15 to 60 ft
Height
35 ft
See the limits for every zone
ZoneFrontEach sideRearHeightEverything built on the lotCoverage by all impervious surfaces
R-1Lots of 15,000 sq ft35 ft15 ft40 ft35 ft, 2.5 stories20%35%
R-2Lots of 2 acres40 ft15 ft60 ft35 ft, 2.5 stories7.5%12.5%
R-5Lots of 6,000 sq ft20 ft10 ft15 ft35 ft, 2.5 stories35%65%
  • Coverage is a share of the lot.

Sheds and detached garages have their own rules. Enter your address above to see them.

Standard limits for single-family lots. Corner lots and special rules can change them. Last checked November 15, 2026. Confirm with the town before you design or buy.

Fairfield (Essex) zoning questions

What are the setbacks in Fairfield (Essex), NJ?

For a single-family house. Corner lots can differ.

  • R-1: 35 ft from the street, 15 ft on each side, 40 ft from the rear line.
  • R-2: 40 ft from the street, 15 ft on each side, 60 ft from the rear line.
  • R-5: 20 ft from the street, 10 ft on each side, 15 ft from the rear line.

What is the minimum lot size in Fairfield (Essex)?

R-1: 15,000 sq ft; R-2: 2 acres; R-5: 6,000 sq ft.

How tall can a house be in Fairfield (Essex)?

R-1: 35 ft, 2.5 stories; R-2: 35 ft, 2.5 stories; R-5: 35 ft, 2.5 stories.

How much of my lot can I cover in Fairfield (Essex)?

R-1: 20% building coverage, 35% lot coverage; R-2: 7.5% building coverage, 12.5% lot coverage; R-5: 35% building coverage, 65% lot coverage.

Can you recommend an architect in Fairfield (Essex)?

Yes. Tell us about your project and we'll connect you with a vetted, licensed residential architect who works in Fairfield (Essex). It's free and there's no obligation.

We'll connect you with a vetted, licensed residential architect who works in Fairfield (Essex) and can turn what your lot allows into drawings for your permit. Free, with no obligation.

Get a free architect referral

Zoning table for your drawings

ITEMREQUIREDEXISTINGPROPOSEDCOMPLIES

ENC = existing nonconforming condition, not increased. * = relief required.

Prepared with a calculation aid. Not a zoning determination. Confirm every requirement with the municipal zoning officer.

What this does not check

Where the numbers come from

Requirements were entered on November 15, 2026 from the Township of Fairfield's Chapter 45, Zoning, Attachment 1, Schedule of Area, Yard and Building Regulations (Section 45-18; amended July 22, 2019 by Ordinance 2019-15 and November 25, 2019 by Ordinance 2019-27). Check every requirement against the current code before relying on it.

A calculation aid, not a zoning determination. Using this site means you agree to the terms of use; see also the privacy policy.

Pick a zone to startSee the table