NJ Zoning Check

Montgomery Township zoning check

Enter your address to find your zone and see if your project fits. No account needed.

About these numbers

Enter a single-family lot in Montgomery's MR, R-5, R-2, R-1 or R district (Skillman, Belle Mead, Blawenburg) and see, line by line, whether a house or addition meets the Township's lot, yard, height and coverage limits.

Covers the Township of Montgomery's single-family zones MR, R-5, R-2, R-1 and R, Somerset County. Checks a new house, an addition or an attached garage.

Numbers last checked November 9, 2026 against the Township's code.

Check a different address

We send the address to New Jersey's public parcel records and public zoning maps to find your lot. Privacy

Know your zone? Leave the address blank.Detailed check for architects and contractors

What you can build in Montgomery Township

Montgomery Township has 5 single-family zones covered here: MR, R-5, R-2, R-1 and R. Minimum lot sizes run from 21,780 sq ft (R) to 1 acre (R-1) in most zones. A house must sit 50 ft back from the street and 35 ft (R) to 50 ft (R-1) from the rear lot line in most zones. Houses can be up to 35 ft tall. Building coverage limits run from 10% (R-2) to 15% (R) in R-2, R-1 and R; in MR and R-5 it depends on the lot.

New house or addition

Depends on your zone. Your address will show your exact numbers.

From the street
Depends on your lot
From each side
Depends on your lot
From the back
Depends on your lot
Height
35 ft
See the limits for every zone
ZoneFrontEach sideRearHeightPrincipal building coverageEverything built on the lot
MRVariesVariesVaries35 ftVariesVaries
R-5VariesVariesVaries35 ftVaries15%
R-2VariesVariesVaries35 ft10%15%
R-1Lots of 1 acre50 ft30 ft50 ft35 ft10%15%
RLots of 21,780 sq ft50 ft20 ft35 ft35 ft15%25%
  • Varies means the limit depends on details of your lot. Check your address to see what we can work out.
  • Coverage is a share of the lot.

Standard limits for single-family lots. Corner lots and special rules can change them. Last checked November 9, 2026. Confirm with the town before you design or buy.

Montgomery Township zoning questions

What are the setbacks in Montgomery Township, NJ?

For a single-family house. Corner lots can differ.

  • R-1: 50 ft from the street, 30 ft on each side, 50 ft from the rear line.
  • R: 50 ft from the street, 20 ft on each side, 35 ft from the rear line.

What is the minimum lot size in Montgomery Township?

R-1: 1 acre; R: 21,780 sq ft. In the other zones it depends on the lot.

How tall can a house be in Montgomery Township?

MR: 35 ft; R-5: 35 ft; R-2: 35 ft; R-1: 35 ft; R: 35 ft.

How much of my lot can I cover in Montgomery Township?

R-5: 15% lot coverage; R-2: 10% building coverage, 15% lot coverage; R-1: 10% building coverage, 15% lot coverage; R: 15% building coverage, 25% lot coverage. In the other zones it depends on the lot.

Can you recommend an architect in Montgomery Township?

Yes. Tell us about your project and we'll connect you with a vetted, licensed residential architect who works in Montgomery Township. It's free and there's no obligation.

We'll connect you with a vetted, licensed residential architect who works in Montgomery Township and can turn what your lot allows into drawings for your permit. Free, with no obligation.

Get a free architect referral

Zoning table for your drawings

ITEMREQUIREDEXISTINGPROPOSEDCOMPLIES

ENC = existing nonconforming condition, not increased. * = relief required.

Prepared with a calculation aid. Not a zoning determination. Confirm every requirement with the municipal zoning officer.

What this does not check

Where the numbers come from

Requirements were entered on November 9, 2026 from the Township's Chapter 16, Section 16-4.2c and d. Check every requirement against the current code before relying on it.

A calculation aid, not a zoning determination. Using this site means you agree to the terms of use; see also the privacy policy.

Pick a zone to startSee the table