NJ Zoning Check

Hillsborough Township zoning check

Enter your address to find your zone and see if your project fits. No account needed.

About these numbers

Enter a single-family lot in Hillsborough's RA, RS, R or R1 zone and see, line by line, whether a house, addition, detached garage or shed meets the Township's lot, yard, height and impervious coverage limits.

Covers the Township of Hillsborough's single-family zones RA, RS, R and R1, Somerset County. Checks a new house, an addition or an attached garage.

Numbers last checked November 10, 2026 against the Township's zoning schedule.

Check a different address

We send the address to New Jersey's public parcel records and public zoning maps to find your lot. Privacy

Know your zone? Leave the address blank.Detailed check for architects and contractors

What you can build in Hillsborough Township

Hillsborough Township has 4 single-family zones covered here: RA, RS, R and R1. Minimum lot sizes run from 20,000 sq ft (R1) to 2 acres (RA). A house must sit 50 ft (R) to 75 ft (RA) back from the street and 40 ft (R) to 50 ft (RA) from the rear lot line. Houses can be up to 35 ft tall. Lot coverage limits run from 10% (RA) to 20% (R1).

New house or addition

Depends on your zone. Your address will show your exact numbers.

From the street
50 to 75 ft
From each side
30 to 50 ft
From the back
40 to 50 ft
Height
35 ft
See the limits for every zone
ZoneFrontEach sideRearHeightEverything paved or built
RALots of 2 acres75 ft50 ft50 ft35 ft, 2.5 stories10%
RSLots of 65,340 sq ft75 ft30 ft50 ft35 ft, 2.5 stories10%
RLots of 1 acre50 ft30 ft40 ft35 ft, 2.5 stories15%
R1Lots of 20,000 sq ft50 ft30 ft40 ft35 ft, 2.5 stories20%
  • Coverage is a share of the lot.

Standard limits for single-family lots. Corner lots and special rules can change them. Last checked November 10, 2026. Confirm with the town before you design or buy.

Hillsborough Township zoning questions

What are the setbacks in Hillsborough Township, NJ?

For a single-family house. Corner lots can differ.

  • RA: 75 ft from the street, 50 ft on each side, 50 ft from the rear line.
  • RS: 75 ft from the street, 30 ft on each side, 50 ft from the rear line.
  • R: 50 ft from the street, 30 ft on each side, 40 ft from the rear line.
  • R1: 50 ft from the street, 30 ft on each side, 40 ft from the rear line.

What is the minimum lot size in Hillsborough Township?

RA: 2 acres; RS: 65,340 sq ft; R: 1 acre; R1: 20,000 sq ft.

How tall can a house be in Hillsborough Township?

RA: 35 ft, 2.5 stories; RS: 35 ft, 2.5 stories; R: 35 ft, 2.5 stories; R1: 35 ft, 2.5 stories.

How much of my lot can I cover in Hillsborough Township?

RA: 10% lot coverage; RS: 10% lot coverage; R: 15% lot coverage; R1: 20% lot coverage.

Can you recommend an architect in Hillsborough Township?

Yes. Tell us about your project and we'll connect you with a vetted, licensed residential architect who works in Hillsborough Township. It's free and there's no obligation.

We'll connect you with a vetted, licensed residential architect who works in Hillsborough Township and can turn what your lot allows into drawings for your permit. Free, with no obligation.

Get a free architect referral

Zoning table for your drawings

ITEMREQUIREDEXISTINGPROPOSEDCOMPLIES

ENC = existing nonconforming condition, not increased. * = relief required.

Prepared with a calculation aid. Not a zoning determination. Confirm every requirement with the municipal zoning officer.

What this does not check

Where the numbers come from

Requirements were entered on November 10, 2026 from a published copy of the Township's Chapter 188, Attachment 2, Schedule of Area, Yard and Building Requirements, whose latest listed amendment is Ord. No. 2021-19 (September 28, 2021). Later amendments could not be checked. Check every requirement against the current code before relying on it.

A calculation aid, not a zoning determination. Using this site means you agree to the terms of use; see also the privacy policy.

Pick a zone to startSee the table