NJ Zoning Check

Millstone Borough zoning check

Enter your address to find your zone and see if your project fits. No account needed.

About these numbers

Enter a single-family lot in Millstone Borough's R-1, R-2, R-20 or R-8 district and see, line by line, whether a house, addition or detached garage meets the Borough's lot, yard, height and coverage limits. The check is free.

Covers the Borough of Millstone's single-family zones R-1, R-2, R-20 and R-8, Somerset County. Checks a new house, an addition, an attached garage or a detached garage or shed.

Numbers last checked November 15, 2026 against the Borough's online code.

Check a different address

We send the address to New Jersey's public parcel records and public zoning maps to find your lot. Privacy

Know your zone? Leave the address blank.Detailed check for architects and contractors

What you can build in Millstone Borough

Millstone Borough has 4 single-family zones covered here: R-1, R-2, R-20 and R-8. Minimum lot sizes run from 1 acre (R-1) to 2 acres (R-2) in most zones. A house must sit 45 ft back from the street and 35 ft from the rear lot line in most zones. Houses can be up to 35 ft tall. Building coverage limits run from 10% (R-2) to 20% (R-1) in the zones that set one (R-1, R-2).

New house or addition

Depends on your zone. Your address will show your exact numbers.

From the street
45 ft in most zones
From each side
20 to 30 ft in most zones
From the back
Depends on your lot
Height
35 ft
See the limits for every zone
ZoneFrontEach sideRearHeightAll buildings together
R-1Lots of 1 acre45 ft20 ftVaries35 ft20%
R-2Lots of 2 acres45 ft30 ftVaries35 ft10%
R-20Varies20 ft35 ft35 ft—
R-8VariesVariesVaries35 ft—
  • Varies means the limit depends on details of your lot. Check your address to see what we can work out.
  • A dash means this check has no limit for that item.
  • Coverage is a share of the lot.

Sheds and detached garages have their own rules. Enter your address above to see them.

Standard limits for single-family lots. Corner lots and special rules can change them. Last checked November 15, 2026. Confirm with the town before you design or buy.

Millstone Borough zoning questions

What are the setbacks in Millstone Borough, NJ?

For a single-family house. Corner lots can differ.

  • R-1: 45 ft from the street, 20 ft on each side.
  • R-2: 45 ft from the street, 30 ft on each side.
  • R-20: 20 ft on each side, 35 ft from the rear line.

What is the minimum lot size in Millstone Borough?

R-1: 1 acre; R-2: 2 acres. In the other zones it depends on the lot.

How tall can a house be in Millstone Borough?

R-1: 35 ft; R-2: 35 ft; R-20: 35 ft; R-8: 35 ft.

How much of my lot can I cover in Millstone Borough?

R-1: 20% building coverage; R-2: 10% building coverage.

Can you recommend an architect in Millstone Borough?

Yes. Tell us about your project and we'll connect you with a vetted, licensed residential architect who works in Millstone Borough. It's free and there's no obligation.

We'll connect you with a vetted, licensed residential architect who works in Millstone Borough and can turn what your lot allows into drawings for your permit. Free, with no obligation.

Get a free architect referral

Zoning table for your drawings

ITEMREQUIREDEXISTINGPROPOSEDCOMPLIES

ENC = existing nonconforming condition, not increased. * = relief required.

Prepared with a calculation aid. Not a zoning determination. Confirm every requirement with the municipal zoning officer.

What this does not check

Where the numbers come from

Requirements were entered on November 15, 2026 from the Borough of Millstone's Chapter 30, Development Ordinance, Article II, Zoning: Sections 30-107 (R-1), 30-108 (R-2), 30-109.1 (R-20) and 30-109.2 (R-8). Check every requirement against the current code before relying on it.

A calculation aid, not a zoning determination. Using this site means you agree to the terms of use; see also the privacy policy.

Pick a zone to startSee the table