NJ Zoning Check

Seaside Heights zoning check

Enter your address to find your zone and see if your project fits. No account needed.

About these numbers

Enter a single-family lot in Seaside Heights' Residential, Single-Family or Low-Density Residential zone and see, line by line, whether a house or addition meets the Borough's lot, yard and height limits. The check is free.

Covers the Borough of Seaside Heights' single-family zones R, SF and LDR, Ocean County. Checks a new house, an addition or an attached garage.

Numbers last checked November 15, 2026 against the Borough's online code.

Check a different address

We send the address to New Jersey's public parcel records and public zoning maps to find your lot. Privacy

Know your zone? Leave the address blank.Detailed check for architects and contractors

What you can build in Seaside Heights

Seaside Heights has 3 single-family zones covered here: R, SF and LDR. Minimum lot sizes run from 2,000 sq ft (R) to 4,000 sq ft (SF). A house must sit 10 ft back from the street and 3 ft from the rear lot line. Height limits run from 27 ft (SF) to 41 ft (R).

New house or addition

Depends on your zone. Your address will show your exact numbers.

From the street
10 ft
From each side
3 ft in most zones
From the back
3 ft
Height
27 to 41 ft
See the limits for every zone
ZoneFrontEach sideRearHeight
RLots of 2,000 sq ft10 ftVaries3 ft41 ft
SFLots of 4,000 sq ft10 ftVaries3 ft27 ft
LDRLots of 2,000 sq ft10 ftVaries3 ft41 ft
  • Varies means the limit depends on details of your lot. Check your address to see what we can work out.

Standard limits for single-family lots. Corner lots and special rules can change them. Last checked November 15, 2026. Confirm with the town before you design or buy.

Seaside Heights zoning questions

What are the setbacks in Seaside Heights, NJ?

For a single-family house. Corner lots can differ.

  • R: 10 ft from the street, 3 ft on each side, 3 ft from the rear line.
  • SF: 10 ft from the street, 3 ft on each side, 3 ft from the rear line.
  • LDR: 10 ft from the street, 3 ft on each side, 3 ft from the rear line.

What is the minimum lot size in Seaside Heights?

R: 2,000 sq ft; SF: 4,000 sq ft; LDR: 2,000 sq ft.

How tall can a house be in Seaside Heights?

R: 41 ft; SF: 27 ft; LDR: 41 ft.

Can you recommend an architect in Seaside Heights?

Yes. Tell us about your project and we'll connect you with a vetted, licensed residential architect who works in Seaside Heights. It's free and there's no obligation.

We'll connect you with a vetted, licensed residential architect who works in Seaside Heights and can turn what your lot allows into drawings for your permit. Free, with no obligation.

Get a free architect referral

Zoning table for your drawings

ITEMREQUIREDEXISTINGPROPOSEDCOMPLIES

ENC = existing nonconforming condition, not increased. * = relief required.

Prepared with a calculation aid. Not a zoning determination. Confirm every requirement with the municipal zoning officer.

What this does not check

Where the numbers come from

Requirements were entered on November 15, 2026 from the Borough of Seaside Heights' Chapter 246, Article V: Sections 246-36, 246-37 and 246-38 for lot sizes, and Section 246-44 for setbacks and height, as amended through Ordinance 2022-17 (code current to May 20, 2026). Check every requirement against the current code before relying on it.

A calculation aid, not a zoning determination. Using this site means you agree to the terms of use; see also the privacy policy.

Pick a zone to startSee the table