NJ Zoning Check

Glen Gardner zoning check

Enter your address to find your zone and see if your project fits. No account needed.

About these numbers

Enter a lot with a single-family house in Glen Gardner's Rural Residential or Village Residential districts and see, line by line, whether a new house or addition meets the Borough's lot, yard and height limits.

Covers the Borough of Glen Gardner's single-family zones RR, VR-1, VR-2 and VR-3, Hunterdon County. Checks a new house, an addition or an attached garage.

Numbers last checked November 16, 2026 against the Borough's Chapter 104, Sections 104-11 to 104-13.1.

Check a different address

We send the address to New Jersey's public parcel records and public zoning maps to find your lot. Privacy

Know your zone? Leave the address blank.Detailed check for architects and contractors

What you can build in Glen Gardner

Glen Gardner has 4 single-family zones covered here: RR, VR-1, VR-2 and VR-3. Minimum lot sizes run from 17,424 sq ft (VR-3) to 3 acres (RR) in most zones. A house must sit 25 ft (VR-1) to 75 ft (RR) back from the street and 35 ft (VR-1) to 100 ft (RR) from the rear lot line. Houses can be up to 35 ft tall.

New house or addition

Depends on your zone. Your address will show your exact numbers.

From the street
25 to 75 ft
From each side
25 to 50 ft
From the back
35 to 100 ft
Height
35 ft
See the limits for every zone
ZoneFrontEach sideRearHeight
RRLots of 3 acres75 ft50 ft100 ft35 ft, 2.5 stories
VR-125 ft25 ft35 ft35 ft, 2.5 stories
VR-2Lots of 1 acre75 ft50 ft100 ft35 ft, 2.5 stories
VR-3Lots of 17,424 sq ft25 ft25 ft35 ft35 ft, 2.5 stories

Standard limits for single-family lots. Corner lots and special rules can change them. Last checked November 16, 2026. Confirm with the town before you design or buy.

Glen Gardner zoning questions

What are the setbacks in Glen Gardner, NJ?

For a single-family house. Corner lots can differ.

  • RR: 75 ft from the street, 50 ft on each side, 100 ft from the rear line.
  • VR-1: 25 ft from the street, 25 ft on each side, 35 ft from the rear line.
  • VR-2: 75 ft from the street, 50 ft on each side, 100 ft from the rear line.
  • VR-3: 25 ft from the street, 25 ft on each side, 35 ft from the rear line.

What is the minimum lot size in Glen Gardner?

RR: 3 acres; VR-2: 1 acre; VR-3: 17,424 sq ft. In the other zones it depends on the lot.

How tall can a house be in Glen Gardner?

RR: 35 ft, 2.5 stories; VR-1: 35 ft, 2.5 stories; VR-2: 35 ft, 2.5 stories; VR-3: 35 ft, 2.5 stories.

Can you recommend an architect in Glen Gardner?

Yes. Tell us about your project and we'll connect you with a vetted, licensed residential architect who works in Glen Gardner. It's free and there's no obligation.

We'll connect you with a vetted, licensed residential architect who works in Glen Gardner and can turn what your lot allows into drawings for your permit. Free, with no obligation.

Get a free architect referral

Zoning table for your drawings

ITEMREQUIREDEXISTINGPROPOSEDCOMPLIES

ENC = existing nonconforming condition, not increased. * = relief required.

Prepared with a calculation aid. Not a zoning determination. Confirm every requirement with the municipal zoning officer.

What this does not check

Where the numbers come from

Requirements were entered on November 16, 2026 from the Borough of Glen Gardner's Chapter 104, Land Use, Sections 104-11, 104-12, 104-13 and 104-13.1. Check every requirement against the current code before relying on it.

A calculation aid, not a zoning determination. Using this site means you agree to the terms of use; see also the privacy policy.

Pick a zone to startSee the table