NJ Zoning Check

Sea Isle City zoning check

Enter your address to find your zone and see if your project fits. No account needed.

About these numbers

Enter a lot with a single-family house in Sea Isle City's R-1, R-2 or R-2A district and see, line by line, whether a house, addition or detached garage meets the City's lot, yard, height, coverage and floor area limits.

Covers the City of Sea Isle City's single-family zones R-1, R-2 and R-2A, Cape May County. Checks a new house, an addition, an attached garage or a detached garage or shed.

Numbers last checked November 16, 2026 against the City's Chapter 26, Sections 26-45, 26-46 and 26-47.

Check a different address

We send the address to New Jersey's public parcel records and public zoning maps to find your lot. Privacy

Know your zone? Leave the address blank.Detailed check for architects and contractors

What you can build in Sea Isle City

Sea Isle City has 3 single-family zones covered here: R-1, R-2 and R-2A. Minimum lot sizes run from 4,750 sq ft (R-2A) to 5,000 sq ft (R-1). A house must sit 15 ft back from the street and 15 ft (R-2A) to 20 ft (R-1) from the rear lot line. Buildings may cover up to 35% of the lot.

New house or addition

Depends on your zone. Your address will show your exact numbers.

From the street
15 ft
From each side
5 ft
From the back
15 to 20 ft
Height
Depends on your lot
See the limits for every zone
ZoneFrontEach sideRearHeightCoverage by the house
R-1Lots of 5,000 sq ft15 ft5 ft, 15 ft total20 ftVaries35%
R-2Lots of 5,000 sq ft15 ft5 ft, 15 ft total20 ftVaries35%
R-2ALots of 4,750 sq ft15 ft5 ft, 15 ft total15 ftVaries35%
  • Varies means the limit depends on details of your lot. Check your address to see what we can work out.
  • Coverage is a share of the lot.

Sheds and detached garages have their own rules. Enter your address above to see them.

Standard limits for single-family lots. Corner lots and special rules can change them. Last checked November 16, 2026. Confirm with the town before you design or buy.

Sea Isle City zoning questions

What are the setbacks in Sea Isle City, NJ?

For a single-family house. Corner lots can differ.

  • R-1: 15 ft from the street, 5 ft on each side (15 ft in total), 20 ft from the rear line.
  • R-2: 15 ft from the street, 5 ft on each side (15 ft in total), 20 ft from the rear line.
  • R-2A: 15 ft from the street, 5 ft on each side (15 ft in total), 15 ft from the rear line.

What is the minimum lot size in Sea Isle City?

R-1: 5,000 sq ft; R-2: 5,000 sq ft; R-2A: 4,750 sq ft.

How much of my lot can I cover in Sea Isle City?

R-1: 35% building coverage; R-2: 35% building coverage; R-2A: 35% building coverage.

Can you recommend an architect in Sea Isle City?

Yes. Tell us about your project and we'll connect you with a vetted, licensed residential architect who works in Sea Isle City. It's free and there's no obligation.

We'll connect you with a vetted, licensed residential architect who works in Sea Isle City and can turn what your lot allows into drawings for your permit. Free, with no obligation.

Get a free architect referral

Zoning table for your drawings

ITEMREQUIREDEXISTINGPROPOSEDCOMPLIES

ENC = existing nonconforming condition, not increased. * = relief required.

Prepared with a calculation aid. Not a zoning determination. Confirm every requirement with the municipal zoning officer.

What this does not check

Where the numbers come from

Requirements were entered on November 16, 2026 from the City of Sea Isle City's Chapter 26, Zoning, Sections 26-45.4 to 26-45.10, 26-46.4 to 26-46.10 and 26-47.4 to 26-47.10. Check every requirement against the current code before relying on it.

A calculation aid, not a zoning determination. Using this site means you agree to the terms of use; see also the privacy policy.

Pick a zone to startSee the table