NJ Zoning Check

Ocean City zoning check

Enter your address to find your zone and see if your project fits. No account needed.

About these numbers

Enter a lot with a single-family house in one of Ocean City's R-1 zones (R-1-30 to R-1-60) and see, line by line, whether a new house or addition meets the City's lot, yard, height, coverage and floor area limits.

Covers the City of Ocean City's single-family zones R-1-30, R-1-30I, R-1-40, R-1-40I, R-1-50, R-1-50I, R-1-60 and R-1-60I, Cape May County. Checks a new house, an addition or an attached garage.

Numbers last checked November 16, 2026 against the City's Chapter 25, Attachment 1 and Section 25-209.

Check a different address

We send the address to New Jersey's public parcel records and public zoning maps to find your lot. Privacy

Know your zone? Leave the address blank.Detailed check for architects and contractors

What you can build in Ocean City

Ocean City has 8 single-family zones covered here: R-1-30, R-1-30I, R-1-40, R-1-40I, R-1-50, R-1-50I, R-1-60 and R-1-60I. Minimum lot sizes run from 3,000 sq ft (R-1-30) to 6,000 sq ft (R-1-60). Building coverage limits run from 25% (R-1-50) to 40% (R-1-30I).

New house or addition

Depends on your zone. Your address will show your exact numbers.

From the street
Depends on your lot
From each side
Depends on your lot
From the back
Depends on your lot
Height
Depends on your lot
See the limits for every zone
ZoneFrontEach sideRearHeightAll buildings togetherEverything paved or built
R-1-30Lots of 3,000 sq ftVariesVariesVariesVaries30%60%
R-1-30ILots of 3,000 sq ftVariesVariesVariesVaries40%70%
R-1-40Lots of 4,000 sq ftVariesVariesVariesVaries30%60%
R-1-40ILots of 4,000 sq ftVariesVariesVariesVaries38%65%
R-1-50Lots of 5,000 sq ftVariesVariesVariesVaries25%55%
R-1-50ILots of 5,000 sq ftVariesVariesVariesVaries35%55%
R-1-60Lots of 6,000 sq ftVariesVariesVariesVaries25%50%
R-1-60ILots of 6,000 sq ftVariesVariesVariesVaries35%50%
  • Varies means the limit depends on details of your lot. Check your address to see what we can work out.
  • Coverage is a share of the lot.

Standard limits for single-family lots. Corner lots and special rules can change them. Last checked November 16, 2026. Confirm with the town before you design or buy.

Ocean City zoning questions

What is the minimum lot size in Ocean City?

R-1-30: 3,000 sq ft; R-1-30I: 3,000 sq ft; R-1-40: 4,000 sq ft; R-1-40I: 4,000 sq ft; R-1-50: 5,000 sq ft; R-1-50I: 5,000 sq ft; R-1-60: 6,000 sq ft; R-1-60I: 6,000 sq ft.

How much of my lot can I cover in Ocean City?

R-1-30: 30% building coverage, 60% lot coverage; R-1-30I: 40% building coverage, 70% lot coverage; R-1-40: 30% building coverage, 60% lot coverage; R-1-40I: 38% building coverage, 65% lot coverage; R-1-50: 25% building coverage, 55% lot coverage; R-1-50I: 35% building coverage, 55% lot coverage; R-1-60: 25% building coverage, 50% lot coverage; R-1-60I: 35% building coverage, 50% lot coverage.

Can you recommend an architect in Ocean City?

Yes. Tell us about your project and we'll connect you with a vetted, licensed residential architect who works in Ocean City. It's free and there's no obligation.

We'll connect you with a vetted, licensed residential architect who works in Ocean City and can turn what your lot allows into drawings for your permit. Free, with no obligation.

Get a free architect referral

Zoning table for your drawings

ITEMREQUIREDEXISTINGPROPOSEDCOMPLIES

ENC = existing nonconforming condition, not increased. * = relief required.

Prepared with a calculation aid. Not a zoning determination. Confirm every requirement with the municipal zoning officer.

What this does not check

Where the numbers come from

Requirements were entered on November 16, 2026 from the City of Ocean City's Chapter 25, Attachment 1 (Non-Discrete Residential R-1 Zones) and Section 25-209 (Schedules C and D). Check every requirement against the current code before relying on it.

A calculation aid, not a zoning determination. Using this site means you agree to the terms of use; see also the privacy policy.

Pick a zone to startSee the table