NJ Zoning Check

Roosevelt zoning check

Enter your address to find your zone and see if your project fits. No account needed.

About these numbers

Enter a single-family lot in Roosevelt's R-40 or R-100 district and see, line by line, whether a house or addition meets the Borough's lot, yard, height and coverage limits.

Covers the Borough of Roosevelt's single-family zones R-40 and R-100, Monmouth County. Checks a new house, an addition or an attached garage.

Numbers last checked November 9, 2026 against the Borough's online code.

Check a different address

We send the address to New Jersey's public parcel records and public zoning maps to find your lot. Privacy

Know your zone? Leave the address blank.Detailed check for architects and contractors

What you can build in Roosevelt

Roosevelt has 2 single-family zones covered here: R-40 and R-100. Minimum lot sizes run from 40,000 sq ft (R-40) to 100,000 sq ft (R-100). A house must sit 40 ft (R-40) to 75 ft (R-100) back from the street and 40 ft (R-40) to 50 ft (R-100) from the rear lot line. Height limits run from 25 ft (R-40) to 30 ft (R-100). Building coverage limits run from 20% (R-40) to 30% (R-100).

New house or addition

Depends on your zone. Your address will show your exact numbers.

From the street
40 to 75 ft
From each side
25 to 40 ft
From the back
40 to 50 ft
Height
25 to 30 ft
See the limits for every zone
ZoneFrontEach sideRearHeightCoverage
R-40Lots of 40,000 sq ft40 ft25 ft40 ft25 ft, 2 stories20%
R-100Lots of 100,000 sq ft75 ft40 ft50 ft30 ft, 2.5 stories30%
  • Coverage is a share of the lot.

Standard limits for single-family lots. Corner lots and special rules can change them. Last checked November 9, 2026. Confirm with the town before you design or buy.

Roosevelt zoning questions

What are the setbacks in Roosevelt, NJ?

For a single-family house. Corner lots can differ.

  • R-40: 40 ft from the street, 25 ft on each side, 40 ft from the rear line.
  • R-100: 75 ft from the street, 40 ft on each side, 50 ft from the rear line.

What is the minimum lot size in Roosevelt?

R-40: 40,000 sq ft; R-100: 100,000 sq ft.

How tall can a house be in Roosevelt?

R-40: 25 ft, 2 stories; R-100: 30 ft, 2.5 stories.

How much of my lot can I cover in Roosevelt?

R-40: 20% building coverage; R-100: 30% building coverage.

Can you recommend an architect in Roosevelt?

Yes. Tell us about your project and we'll connect you with a vetted, licensed residential architect who works in Roosevelt. It's free and there's no obligation.

We'll connect you with a vetted, licensed residential architect who works in Roosevelt and can turn what your lot allows into drawings for your permit. Free, with no obligation.

Get a free architect referral

Zoning table for your drawings

ITEMREQUIREDEXISTINGPROPOSEDCOMPLIES

ENC = existing nonconforming condition, not increased. * = relief required.

Prepared with a calculation aid. Not a zoning determination. Confirm every requirement with the municipal zoning officer.

What this does not check

Where the numbers come from

Requirements were entered on November 9, 2026 from the Borough's Chapter Z, Zoning, Section 4.500 and its District Lot, Yard, Coverage and Height Regulations table. Check every requirement against the current code before relying on it.

A calculation aid, not a zoning determination. Using this site means you agree to the terms of use; see also the privacy policy.

Pick a zone to startSee the table