NJ Zoning Check

Asbury Park zoning check

Enter your address to find your zone and see if your project fits. No account needed.

About these numbers

Enter a one- or two-family lot in Asbury Park's R1, R2 or R3 zone and see, line by line, whether a house or addition meets the City's lot, yard, height and coverage limits.

Covers the City of Asbury Park's single-family zones R1, R2 and R3, Monmouth County. Checks a new house, an addition or an attached garage.

Numbers last checked November 9, 2026 against the City's online code.

Check a different address

We send the address to New Jersey's public parcel records and public zoning maps to find your lot. Privacy

Know your zone? Leave the address blank.Detailed check for architects and contractors

What you can build in Asbury Park

Asbury Park has 3 single-family zones covered here: R1, R2 and R3. Each needs a lot of at least 5,000 sq ft in most zones. Houses can be up to 30 ft tall. Buildings may cover up to 30% of the lot.

New house or addition

Depends on your zone. Your address will show your exact numbers.

From the street
Depends on your lot
From each side
6 ft
From the back
25 ft
Height
30 ft
See the limits for every zone
ZoneFrontEach sideRearHeightAll buildings togetherEverything paved or built
R1Lots of 5,000 sq ftVaries6 ft, 14 ft total25 ft30 ft, 2.5 stories30%65%
R2Varies6 ft, 14 ft total25 ft30 ft, 2.5 stories30%65%
R3Lots of 5,000 sq ftVaries6 ft, 14 ft total25 ft30 ft, 2.5 stories30%65%
  • Varies means the limit depends on details of your lot. Check your address to see what we can work out.
  • Coverage is a share of the lot.

Standard limits for single-family lots. Corner lots and special rules can change them. Last checked November 9, 2026. Confirm with the town before you design or buy.

Asbury Park zoning questions

What are the setbacks in Asbury Park, NJ?

For a single-family house. Corner lots can differ.

  • R1: 6 ft on each side (14 ft in total), 25 ft from the rear line.
  • R2: 6 ft on each side (14 ft in total), 25 ft from the rear line.
  • R3: 6 ft on each side (14 ft in total), 25 ft from the rear line.

What is the minimum lot size in Asbury Park?

R1: 5,000 sq ft; R3: 5,000 sq ft. In the other zones it depends on the lot.

How tall can a house be in Asbury Park?

R1: 30 ft, 2.5 stories; R2: 30 ft, 2.5 stories; R3: 30 ft, 2.5 stories.

How much of my lot can I cover in Asbury Park?

R1: 30% building coverage, 65% lot coverage; R2: 30% building coverage, 65% lot coverage; R3: 30% building coverage, 65% lot coverage.

Can you recommend an architect in Asbury Park?

Yes. Tell us about your project and we'll connect you with a vetted, licensed residential architect who works in Asbury Park. It's free and there's no obligation.

We'll connect you with a vetted, licensed residential architect who works in Asbury Park and can turn what your lot allows into drawings for your permit. Free, with no obligation.

Get a free architect referral

Zoning table for your drawings

ITEMREQUIREDEXISTINGPROPOSEDCOMPLIES

ENC = existing nonconforming condition, not increased. * = relief required.

Prepared with a calculation aid. Not a zoning determination. Confirm every requirement with the municipal zoning officer.

What this does not check

Where the numbers come from

Requirements were entered on November 9, 2026 from the City's Chapter 30, Section 30-67, Schedule 1, Schedule of Height, Yard and Bulk Requirements. Check every requirement against the current code before relying on it.

A calculation aid, not a zoning determination. Using this site means you agree to the terms of use; see also the privacy policy.

Pick a zone to startSee the table