NJ Zoning Check

Plainsboro zoning check

Enter your address to find your zone and see if your project fits. No account needed.

About these numbers

Enter a single-family lot in Plainsboro's R-85 Residence Zone and see, line by line, whether a house, addition, detached garage or shed meets the Township's lot, yard, height, floor area and coverage limits. The check is free.

Covers the Township of Plainsboro's single-family zone R-85, Middlesex County. Checks a new house, an addition, an attached garage or a detached garage or shed.

Numbers last checked November 15, 2026 against the Township's online code.

Check a different address

We send the address to New Jersey's public parcel records and public zoning maps to find your lot. Privacy

Know your zone? Leave the address blank.Detailed check for architects and contractors

What you can build in Plainsboro

Plainsboro has one single-family zone covered here, R-85. Each needs a lot of at least 15,000 sq ft. A house must sit 45 ft back from the street and 40 ft from the rear lot line. Houses can be up to 25 ft tall. Buildings may cover up to 20% of the lot.

New house or addition

Your address will show your exact numbers.

From the street
45 ft
From each side
10 ft
From the back
40 ft
Height
25 ft
See the limits for the R-85 zone
ZoneFrontEach sideRearHeightAll buildings together
R-85Lots of 15,000 sq ft45 ft10 ft40 ft25 ft20%
  • Coverage is a share of the lot.

Sheds and detached garages have their own rules. Enter your address above to see them.

Standard limits for single-family lots. Corner lots and special rules can change them. Last checked November 15, 2026. Confirm with the town before you design or buy.

Plainsboro zoning questions

What are the setbacks in Plainsboro, NJ?

For a single-family house. Corner lots can differ.

  • R-85: 45 ft from the street, 10 ft on each side, 40 ft from the rear line.

What is the minimum lot size in Plainsboro?

R-85: 15,000 sq ft.

How tall can a house be in Plainsboro?

R-85: 25 ft.

How much of my lot can I cover in Plainsboro?

R-85: 20% building coverage.

Can you recommend an architect in Plainsboro?

Yes. Tell us about your project and we'll connect you with a vetted, licensed residential architect who works in Plainsboro. It's free and there's no obligation.

We'll connect you with a vetted, licensed residential architect who works in Plainsboro and can turn what your lot allows into drawings for your permit. Free, with no obligation.

Get a free architect referral

Zoning table for your drawings

ITEMREQUIREDEXISTINGPROPOSEDCOMPLIES

ENC = existing nonconforming condition, not increased. * = relief required.

Prepared with a calculation aid. Not a zoning determination. Confirm every requirement with the municipal zoning officer.

What this does not check

Where the numbers come from

Requirements were entered on November 15, 2026 from the Township of Plainsboro's Chapter 101, Zoning, Article VI, R-85 Residence Zone, Sections 101-38 to 101-47. Check every requirement against the current code before relying on it.

A calculation aid, not a zoning determination. Using this site means you agree to the terms of use; see also the privacy policy.

Pick a zone to startSee the table