NJ Zoning Check

Milltown zoning check

Enter your address to find your zone and see if your project fits. No account needed.

About these numbers

Enter a single-family lot in Milltown's R-4 to R-15 zones and see, line by line, whether a house or addition meets the Borough's lot, yard, height and coverage limits.

Covers the Borough of Milltown's single-family zones R-4, R-6, R-6A, R-8, R-10 and R-15, Middlesex County. Checks a new house, an addition or an attached garage.

Numbers last checked November 4, 2026 against the Borough's bulk schedule.

Check a different address

We send the address to New Jersey's public parcel records and public zoning maps to find your lot. Privacy

Know your zone? Leave the address blank.Detailed check for architects and contractors

What you can build in Milltown

Milltown has 6 single-family zones covered here: R-4, R-6, R-6A, R-8, R-10 and R-15. Minimum lot sizes run from 4,000 sq ft (R-4) to 15,000 sq ft (R-15). A house must sit 10 ft (R-4) to 40 ft (R-15) back from the street and 10 ft (R-4) to 20 ft (R-8) from the rear lot line. Houses can be up to 35 ft tall. Building coverage limits run from 20% (R-15) to 35% (R-4).

New house or addition

Depends on your zone. Your address will show your exact numbers.

From the street
10 to 40 ft
From each side
6 to 15 ft
From the back
10 to 20 ft
Height
35 ft
See the limits for every zone
ZoneFrontEach sideRearHeightEverything built on the lotEverything paved or built
R-4Lots of 4,000 sq ft10 ft6 ft10 ft35 ft, 2.5 stories35%60%
R-6Lots of 6,000 sq ft15 ft7 ft15 ft35 ft, 2.5 stories30%50%
R-6ALots of 6,000 sq ft15 ft7 ft15 ft35 ft, 2.5 stories30%50%
R-8Lots of 8,000 sq ft20 ft10 ft20 ft35 ft, 2.5 stories25%40%
R-10Lots of 10,000 sq ft25 ft12 ft20 ft35 ft, 2.5 stories25%40%
R-15Lots of 15,000 sq ft40 ft15 ft20 ft35 ft, 2.5 stories20%30%
  • Coverage is a share of the lot.

Standard limits for single-family lots. Corner lots and special rules can change them. Last checked November 4, 2026. Confirm with the town before you design or buy.

Milltown zoning questions

What are the setbacks in Milltown, NJ?

For a single-family house. Corner lots can differ.

  • R-4: 10 ft from the street, 6 ft on each side, 10 ft from the rear line.
  • R-6: 15 ft from the street, 7 ft on each side, 15 ft from the rear line.
  • R-6A: 15 ft from the street, 7 ft on each side, 15 ft from the rear line.
  • R-8: 20 ft from the street, 10 ft on each side, 20 ft from the rear line.
  • R-10: 25 ft from the street, 12 ft on each side, 20 ft from the rear line.
  • R-15: 40 ft from the street, 15 ft on each side, 20 ft from the rear line.

What is the minimum lot size in Milltown?

R-4: 4,000 sq ft; R-6: 6,000 sq ft; R-6A: 6,000 sq ft; R-8: 8,000 sq ft; R-10: 10,000 sq ft; R-15: 15,000 sq ft.

How tall can a house be in Milltown?

R-4: 35 ft, 2.5 stories; R-6: 35 ft, 2.5 stories; R-6A: 35 ft, 2.5 stories; R-8: 35 ft, 2.5 stories; R-10: 35 ft, 2.5 stories; R-15: 35 ft, 2.5 stories.

How much of my lot can I cover in Milltown?

R-4: 35% building coverage, 60% lot coverage; R-6: 30% building coverage, 50% lot coverage; R-6A: 30% building coverage, 50% lot coverage; R-8: 25% building coverage, 40% lot coverage; R-10: 25% building coverage, 40% lot coverage; R-15: 20% building coverage, 30% lot coverage.

Can you recommend an architect in Milltown?

Yes. Tell us about your project and we'll connect you with a vetted, licensed residential architect who works in Milltown. It's free and there's no obligation.

We'll connect you with a vetted, licensed residential architect who works in Milltown and can turn what your lot allows into drawings for your permit. Free, with no obligation.

Get a free architect referral

Zoning table for your drawings

ITEMREQUIREDEXISTINGPROPOSEDCOMPLIES

ENC = existing nonconforming condition, not increased. * = relief required.

Prepared with a calculation aid. Not a zoning determination. Confirm every requirement with the municipal zoning officer.

What this does not check

Where the numbers come from

Requirements were entered on November 4, 2026 from the Borough's Chapter 34, Comprehensive Development, Section 34-29 Schedule of Bulk Requirements. Ordinance 26-1583 concerns affordable housing and development fees and does not change this schedule. Check every requirement against the current code before relying on it.

A calculation aid, not a zoning determination. Using this site means you agree to the terms of use; see also the privacy policy.

Pick a zone to startSee the table